How to Troubleshoot & Replace Frigidaire AP4510792 / 316557205 Clock Timer (Electronic Oven Control)

Tried to replace the temperature probe first without testing with ohm meter; decided to take a chance. I then ordered the EOC timer/oven control. Now works great and also gained the seconds timer along with minute timer that was not stock with the first timer. Happy man; didn't have to pay the labor to install the parts, the videos gave me the confidence that I could complete the repair. 

Ordered the part from the most fantastic appliance parts store, and received the part in less than 24 hours (did not pay extra for fast shipping!!). Took off the bad part and wired the new part with no issues at all. 

Unplugged oven.took pictures with phone. Took bad one out.put new one in.took pictures for reassembly guide. 

I first tested the temperature sensor and baking element with an ohmmeter. After confirming both were good I ordered a control panel from Appliance Parts Pros. I had a question about the part since it looked different from my OEM. The agent I chatted with online was super helpful and patient! It was determined that the part I received was just an updated, universal piece for Electrolux and Frigidaire. I replaced the panel and now my oven heats just fine!! The only part of the install I was at all worried about was reusing the overlay from my bad panel and putting it on my new panel. It was surprisingly easy! 

I ordered the part, I paid for next day delivery. It arrived 18 hrs later. The install was easy using you tube. It was just plug and play and now the range works like new again. 

Knowing which parts needed to be replaced, I found the AppliancePartsPros website....I love this stove in a biscuit color and refused to buy new. Locating the correct parts on the website was easy and with the video tutorials on how to replace I felt confident I could repair my stove/oven. If I had known of Appliance Part Pros I would have repaired my 25 year old Whirlpool refrigerator instead of replacing....highly recommend Appliance Parts Pros. My items delivered in a day. 

Tested element for proper ohms. Determined control board was not functioning properly. Took back panel off, took picture of how wires plugged in, removed control board, put new control board in, plugged in wires. Put back panel back on. Oven works, heating element would now glow red. About 20 minutes of work. Thank you. 

I had to replace both the T-stat probe and the control board. I may have been able to only replace the control board, since the T-stat probe tested ok with my multi-meter, but I went ahead and replaced both since I did not have a way to test the T-stat at higher temps. 

Replaced the control board. 

Ordered a replacement from Appliance Parts Pros.com