How to Troubleshoot & Replace Frigidaire AP4362288 / 318293825 Surface Burner Switch

First turned off the breaker. I took the cooktop out of the counter, put two planks under it to hold it up, took off the glass, raised the main part up from the metal box and put 1 2x4 under the control end to hold it up. took out 2 screws, pulled out the old control, changed out the wires one at a time, put it back in with the $8 screws, took out the 2x4,dropped in the box, put the glass back on. turned on the breaker and tested it. then i put it back in the counter after removing the planks that held it up. i paid a pro $275 to do this before . i watched him and it looked pretty simple which it was. 

With a new burner switch 

Replaced worn out Infinite Switch. 

With the switch that I sent for from your company. 

Replaced the control. 

Replaced the switch. 

I shut off the breaker, removed the knob and removed the two screws holding down the cooktop from under the cabinet. I removed the cooktop and flipped it over. I removed the screws holding the cover plate. I unscrewed the two screws holding the switch but cold have done that before flipping the cooktop. Make sure you move the wires one at a time. Both switches are clearly labeled but I would have lost track of which wire was which. One of the wires does have an extra tab on it for the 6th wire so don’t be alarmed. Reverse the process and you are done. It really was a straight forward repair. 

Two new switches that were delivered the next day. Awesome. Easy fix and worth doing.