Nathan M Alexandria , VA March 30, 2015 Install anti tipping bracket for stove Part arrived quickly and was an easy install1 Read More... 17 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Corey B Portland , OR November 03, 2014 Needed anti tip plate By moving the stove, installing with a few screws and sliding it back into place. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Edward G Park Forest , IL September 23, 2014 No problem reinstalling electric range and needed the anti tip bracket Screwed it to the floor and done. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Thomas F Clifton , NJ January 08, 2022 Needed anti tip bracket for a stove. First time I used this company. Needed anti tip brackets for a stove. Web sites search was quick and accurate. I ordered parts at 2 pm and had them the next day. Very impressed with this company. Would recommend them Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Mike B Reston , VA September 16, 2019 Appliance: Model WHIRLPOOL WFG505M0BS0 Stove had no anti tip bracket Great! The part was exactly what was needed. Actually, this part is practically "universal" because each of the 2 "legs" (it's shaped like an "L") are a different length - so one or the other should fit almost any stove "foot". It comes with no instructions but installation is simple. The object is to make sure the cutaway "slot" lines up perfectly with one of the stove's rear "feet". When the stove is pushed back into position against the wall, the stove's rear foot will slide right into that slot and hold the stove down so it can't tilt forward. 1) Slide the bracket over the stove's rear foot (either one) 2) Measure from the edge of the bracket to the nearest side of the stove. 3) Mark that measurement on the back wall, measured from the side of the adjoining cabinet 4) Don't forget to add 1/4" or so, if the countertop overhangs the side of the cabinet. 5) Place Bracket against the mark on the wall, and screw horizontally (lower holes) into the floor plate (the 2x4 lying on the floor behind the drywall). 6) Slide stove back into position. Rearfoot should slip into the Bracket's slot. 7) Test, by grabbing the rear "Control Panel" of the stove, and pulling forward. 8) If the stove won't tilt forward - you've succeeded! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Paul H Conway , SC June 28, 2019 Missing anti tip bracket for oven I had watched videos online, had a general idea of how to install but always good to check and make sure. It was a very easy fix, no drama involved. What was most impressive about the whole experience was the speed in which the part was shipped to me. I ordered it with standard and I guess the "FAST" delivery, and I am not kidding, I had the part in my hand a day and a half later. That was totally unbelievable since when you do order something overnight, half the time or more you don't get it. The bad part was I thought I would have the weekend off before the part arrived, but instead, I had to install it because the wife said, LOL! It really only took about 15 min to install, and thank goodness it is not football season yet! LOL! As always...Appliance Parts Pro is awesome and thanks for coming through again. Always my go-to guys!!! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Michael H Clinton , UT March 20, 2018 Needed stove anti tip bracket to satisfy home inspector write up I put the bracket against the back of the stove foot and slowly pushed the stove in then back out. This left the bracket right where it needed to be installed. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Juan A Pennsauken , NJ January 15, 2016 I needed to install the tiping bracket Couple screws Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers