Sharon M Canton , MA August 19, 2016 Many button didn't work on control pad including cancel button so no way to turn off oven Ordered control panel. There's a strip that connects the control buttons to the mother board. Just push the black tab out if the holes on the old strip and gently pull strip out. Then insert new strip, pushing in far enough for tabs to go through the holes. Reconnect mother board to control panel and put control panel back on stove. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set
Dean L North Canton , OH November 09, 2015 Several numbers on the control panel quit working Replaced the Control Panel Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Dennis P San Diego , CA November 04, 2015 Appliance: Jenn-Air Range-S/C S/I Gas & Elec Duel Fuel JDS9860AAW Defective key pad oven not able to bake etc Replaced the Control Panel Asembly as suggested. Not too difficult to take old one out with several screws/nuts to remove. Only difficult part is taking the circuit ribbon out of the plastic socket - you must carefully use a flat head screw driver and delicately push the top plastic bracket backwards until it opens to allow the ribbon to be pulled out. Then just reverse the process and snap the bracket back in place once you have put the new ribbon into the socket. Stove now works like a champ. Great service of delivery of item as advertised - Good price. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers, Socket Set
Scott H Menominee , MI August 28, 2015 Appliance: Jenn-Air Range-S/C S/I Gas & Elec Duel Fuel JDS9860AAW Jenn air famous f1 7 error Replaced Jenn Air's famously defective Control Panel via removing a dozen or so screws, dislodging the notoriously poorly designed ribbon cable, and replacing it with the aforementioned Control Panel Assembly from AppliancePartsPros. scale of 1 - 10 about a 5 in difficulty, mostly aligning the pieces back together took a bit of patience. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Adjustable Wrench, Nut Drivers, Screwdrivers
Bruce H Spring Valley , CA August 24, 2015 Key pad shorting on the control panel error code Looked up the error code online. Checked connections as recommended. didi not fix, so looked up part number and searched for best price on the replacement control panel. Chose AppliancePartsPros.com because of the fast shipping available, as we needed to have an oven for our family of four. Thanks you for the right part at the right price, and super fast processing and shipping!!!!! Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
William S Frederick , MD August 17, 2015 Touch panel was partially operational Ordered the Control Panel Assembly. It arrive the next day. The installation was not that difficult. The critical piece of the repair was removing the ribbon that connects to the Control Panel from the harness. Once this was loose (wiggle this very gently) I installed the new part in the reverse order and presto my Jenn Air now is 100% functional. Thanks for the speedy delivery and exact match on the part. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers