How to Troubleshoot & Replace Whirlpool AP6019234 / WPW10310274 Oven Bake Element

Replaced bake unit and temp sensor 

Replaced 

I watched a video showing the process. I ordered the part from you which came very quickly. Turned off the breaker to the range. Pulled the slide in range out, unclipped the connectors, removed the element and installed the new element. Tested the repair by turning on the oven and seeing the element get hot. Very straight-forward process. Hardest part was pulling out the range. 

Easy fix - ordered oven element - repair took about 10 minutes 

Ordered on line and had part in two days. Installed it right away. 

REPAIR TOOK 5 MINUTES THE ELEMENT SHOWED SIGNS OF DAMAGE & SOME WHITE MARKS (LIKE WHEN AN ELECTRICAL SHORT OCCURS) WERE DIRECTLY UNDER DAMAGED AREA OF ELEMENT. 

Following the supplied repair video instructions the repair only took a few minutes. The part fit perfectly even though it was a slightly different design. Oven back on line 

Luckily, did not have to get to the rear of the appliance to make the connection pulled through the oven for temperature sensor. Purchased the Bake element as well, just in case, the original one was still good. On the new one had to make a temperature adjustment, whereas existing one was good to go at zero adjustment. 

Ordered part from you and easy replacement done without problem. Turned off electricity to house before working on the replacement 

Two screws to remove and the old element pulls out remove the slide on connectors reverse the process with the new element