Anthony W Munford , TN November 23, 2015 Appliance: Model 665.69612992 Frame cracked center bottom and glass slipping down Remove three side and two bottom screws. Carefully remove frame, handle side first, be sure to hold so glass doesn't slip away. Remove glass and inner bezel from broken frame. Place the glass and bezel into new frame, inner bezel clips under plastic hooks. I used hot-glue at each hook location to help keep glass in place when mictowave door is slammed (I believe this is what broke it in the first place) Move handle from old frame to new frame, two screws inside of frame. Install new assembly, hing side first. Install the five screws and you are done, Read More... 11 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Sarah M Athens , GA March 21, 2016 Microwave door frame and handle were cracked and inexpertly repaired by previous owners The old handle... came off by itself, prompting us to order these parts. They arrived very quickly! Removed just a few screws to get the old frame off, cleaned the glass and inner frame, attached the handle to the new frame and put it all back together. (The pliers were for removing a screw where the old handle had broken off.) Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
Gary R Moore , OK February 10, 2017 Appliance: Model 665-68611891 Broken parts Ordered new Door Frame and Grill Vent parts. Shipping was very fast and the parts were newly manufactured. A blind man could have done it. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Bruce T Radcliff , KY December 02, 2016 Appliance: Model 665.60652000 Door frame and handle both cracked Parts arrived two days after placing the order. Had to remove a small piece of the clips on the door frame so I could get the glass back in. They were too snug and felt like I would crack the frame if I forced it. Then I hot glued the glass to hold it firmly in place. Replacing the handle was no problem. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Screwdrivers
Ronald S Hudson , WI November 13, 2016 Broken door frame and grill vent Quick and easy repair. Make sure you pay attention to the glass in the door. Had it in the opposite direction and had to remove the door frame again to fix it. Over all very easy repair. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Jackson G Corvallis , OR January 02, 2016 Cracked external door frame on a kenmore microwave Quick and easy Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Richard B Easley , SC June 06, 2015 Appliance: Model KENMORE 665.68611991 Kenmore microwave broken door frame This is the second time the plastic door frame has been replaced on a 16 year old Chinese-built unit, Model 665.68611991. The plastic is very brittle and cracks at the handle screws, behind the handle, on the right edge, on the bottom, and inside where the outer glass is supported. The handle is made of the same material, and lasts a bit longer, but still cracks eventually. There are two videos online that describe how to replace the plastic door frame on a similar model: https://www.youtube.com/watch?v=TILkeiT7FjQ https://www.youtube.com/watch?v=-Z7d4MXav4U The second one is a but brutal. I replaced the five flathead screws with automotive trim screws to distribute the stresses a bit better. These #8 screws are available at auto parts stores. Dorman 456930BP I also put large flat washers under the screws that hold the handle to the door frame. Perhaps it will last longer this time. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Screwdrivers
Mary C Granada Hills , CA February 20, 2015 Appliance: Model 66861622100 2002 microwave door and handle broken New door frame and handle from appliance parts pros ..We got them in ONE DAY!! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Mark L Snohomish , WA October 22, 2016 Broken microwave door frame We had a broken, above the range microwave door frame made in 2000. I thought I was out of luck as it is 16 years old. I Googled the model number anyways and found this site. I was surprise the part was in stock, and shipped that day. Three days later the door frame was replaced. It took 10 minutes. Just pay attention to how it comes apart and you'll have no issues. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
John S Aurora , CO March 20, 2016 Cracked frame Purchased new frame to install Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers