How to Troubleshoot & Replace Whirlpool AP6011024 / WP74008014 Oven Door Hinge

Dismount door from oven, by removing screw that secures the lock tab in place for each hinge. Lift door up and out. Door weighs about 20 pounds. Lay face up. Remove 6 screws, 3 on top, 3 on bottom. Remove door face. Remove one screw that secures the hinge assembly to door. Make note of which hole that screw came from. Lift off. Install new hinge in reverse order of removal. Reattach door face. Install door back on oven, and replace the lock tabs. The door will not close fully, until you pull the pin that fixes the hinge partially open. Just pull back on the door, and use a pair of needle nose pliers to get it out. The pin is there to make it easy to install the hinge assembly. Recommend you replace both hinges at the same time. Unless you want to do this job again. They last about 10 to 12 years. 

Replaced both door hinges. Took door apart (6 screws), replaced both hinges, and reassembled the door. 25 min project. 

With the help of a short video, I was able to replace the hinges, about 45 mins, fairly easy! 

I have used Appliance Parts Pros before to save $ by going the DIY route and avoiding expensive repair work. The site is easy to use. For Diagnostics you simply type in the model number and what the problem is. You quickly find out the most likely repair and parts needed are ready to shop for. Delivery is almost always next day if you live in CA. I ordered the oven hinges late Friday and received them Saturday 4PM! Repair instructions and time of repair were spot on accurate. Hate calling repairmen and love this company. 

The hinge was easy to find on your site, it arrived in a very timely manner. The part was easy to replace and the door now works better then it ever has, after 10 years the seal is tight! 

We ordered new hinges and were able to replace them with ease after watching your video. 

Replaced the springs on both doors