How to Troubleshoot & Replace Whirlpool AP6014056 / WP9760574 Wall Oven Door Hinge

Oven door would no longer close completely, ordered replacement hinges, 30 minute repair. 

Great, I had my two new hinge door's put on in about 10-15 minutes 

Replaced both hinges. Easiest repair I’ve done on this unit. Took less than 20 minutes from start to finish. 

I replaced the hinges in the door with the parts I bought here. Was a quick fix, took me about 15-20 minutes. Watched the video. All you need to do is carefully remove all of the black screws on the interior and sides of the door and the face lifts off exposing the hinges. Just pull out the old hinges and place in the new ones in the same spot and then put the screws back in to reassemble the door. You will need to compress the door to get the screws to reach because they are just long enough. But just take your time, don't over tighten the screws, and it will go back together. 

Ordered the two hinges, removed the oven door and replaced the hinges. 

I fixed it by replacing the oven hinges 

Installed new hinges 

Replaced both hinges The AP Pro video is great 

New hinges and outer door glass. 

We have a Kenmore double convection oven we use almost daily. The top oven is used more often and the door started to look crooked when it was in the closed position and would fall open unless it was forced downward then would seem to pop into position to stay closed. It also made a squeaking nose when it was opened. Also one of the oven door locks (for removal) was hard to move. Removed the door and taped the "light switch and door latch together to prevent the light from staying on. This lets us keep power to the oven and use the lower one while the parts arrived. Disassembled the oven door carefully using the video. I thought I would try to repair the hinges with new bolts, but decided to just order new ones as the spring is high tension and I like my body parts. New parts ( left and right hinges) arrived in 3 days. Replacing then required Phillips head screwdriver and the screws really needed to be torked into the new housing of the hinge body. Once it got a bite in the metal, the screws twisted in with some force. All are back together and working great. I have purchased other parts on AppliancePartsPros.com and again adding the model number shows the same parts for less cost . Easy parts breakdown images and the cross reference of other part numbers is very helpful.