Robert S Buford , GA October 25, 2014 Several lights weren't working and dishwasher would not come on I found the ribbon cable from the controller to the control pad failed internally and the traces were broken. After replacing the control pad & ribbon cable, the dishwasher works normally. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Julian A Dothan , AL July 18, 2015 The control panel had broken screw mounts that caused the door to not open properly I replaced the control panel and the dishwasher works fine now. It only took about 20 minutes to repair the dishwater. It works fine now. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Abraham C Chardon , OH March 15, 2014 Rinse light stayed on, usually could not start wash Replaced panel by unscrewing inside of door panel andr then unscrewing cover from control board. hardest part was inserting new flex cable into control board, but after taking the cover off the board it was easier to get a good angle. need a Torx bit for the screws. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Cecil G Wilmore , KY February 10, 2017 Appliance: Maytag Undercounter Dishwasher MDBTT60AWB3 The start button on control panel wouldn't work After pricing new dishwashers decided to replace the panel. I ordered it on a Monday morning had it Tuesday afternoon. Removed the front took old panel off put new one on. Dishwasher was in operation that night. Cost was about a third of new washer. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Socket Set