How to Troubleshoot & Replace Whirlpool AP6010947 / WP74006515 Screw

Start by removing the frame on the sides and bottom of the door. (Do not unscrew the corner screw holding the side frame and bottom together.) Be careful the glass will fall once the last screw is removed from the bottom so hold tight. Carefully remove glass and set aside. Remove top frame that held the handle. Once all the frame work and outer glass is removed unscrew the bracket that held the door handle from the door. Taking the top frame and bracket insert screw and washer and screw the handle on. Reattach bracket with the top frame and door handle. Put glass in bottom frame and reattach framework. (** Might find it easier to work on by removing the oven door. Just open the door and lift up sliding the door off the hinges. To put door back slide it back on the hinges. This step is not necessary but it does make handling the glass easier.) 

Ordered new handle from Appliance Parts Pro and replaced with the new handle. 

My advice? Get husband out of the way, then watch a video and it will be fixed in no time! And you don't have to stand there handing him parts! 

Ordered a new one and replaced it, 

Just had to remove a few screws and replaced easily. Even had time clean the interior glass. Looks like new. Perfect match. 

It was a 2 person job. Went well. Thought that I was buying 2 screw but only 1 came in the pack. 

Installed a new door handle. 

Took door off range, undid screws and replace handle and put door back together again. 

Replaced the upper handle. Removed the upper oven surface, cleaned and replaced the left front element. All parts came on time and were easy to replace. Saved me 100's of dollars from an appliance pro. Appliance Parts Pros will be where I shop for parts first. 

Was able to locate the needed part on your website. Watched a video on YouTube on how to replace the handle on the Maytag range. Because we were able to fix the problem, we will keep the 15 year old range for a while before replacement is needed.