How to Troubleshoot & Replace Whirlpool AP5950105 / W10727360 Door Switch

If one switch is bad the others may not be far behind. All door switches replaced. 

I checked continuity in door switches and found one without continuity so I replaced the faulty switch and the microwave is working. 

Ordered new door switch and switch interlock plate. The parts arrived early. It took about 15 minutes to install them. Everything fit perfect an the microwave works again. 

I replaced all three of the door switches. The instructions on line were for a whirlpool and I have an Amana so the main difference was the top vent removal but not a big deal. Also the switches were reversed so that there was a double switch on the top instead of on the bottom. The little clips that hold the switch in are very fragile and you have to be very careful when popping out the switch. VERY GENTLY OR THEY WILL BREAK. Over all it was pretty easy after watching the video a couple of times. 

I replaced all three door switches and installed new fuse. Took about 30 min. It worked great afterward. One of the door switches was burned up and fried. It was shorting and blowing the fuses. I went ahead and replaced all three in hopes that this won't happen again for a long time. 

Sent message to AppliancePartsPros.com and they told me what to order. 

Replaced all three door switches. 

My bodacious, smart, handsome and kind friend replaced the door switches (3) 

Replaced both of the top door switches in control panel AP4429884 and AP5950105 Made by: Whirlpool need torx drive to remove switch from cabinet. 

Changed out door switches.