Daniel C Covington , GA September 17, 2015 Appliance: Model WFW9259WW00 Water was dripping out of the rear of my whirlpool he washing machine even when the machine was turned off Found water was dripping form the cold water inlet valve. Searced the net and found AppliancePartsPros.com searched and found the exact part for my washing machine. Double cheked by the Model number and it was correct. ordered on Friday received on Saturday. did not install until Monday nd the problem was fixed. I used normal delivery. Great Job of order fulfilment. Part is correct and is exact replacement. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers
Arthur W Johnstown , PA November 29, 2014 Appliance: Whirlpool Washer WFW9151YW00 No cold water/lf code kept coming up Replaced cold water valve watched video on parts pro.com took about 15 minutes total to change it so now it is working like new Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers, Socket Set
Roger S Germantown , TN November 18, 2014 Appliance: Whirlpool Washer WFW9050XW00 Softener dispenser didn't work Went into top of washer where the solenoid valves were easily accessible. I jiggled the wires and re-checked the units. They performed just fine. I now have spare parts on hand. I'd replaced a valve previously due to leakage, so I like having an extra one handy just in case of a future problem. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers
James M Palm Springs , CA March 29, 2025 Appliance: Model 2000 SERIES MAYTAG My front loader would sometimes slowly fill with water and during a wash i would get a lf (low flow) error code I bought two new valves. They were about 12 years old. They slowly got corroded, I guess, not sealing fully every time letting water in. And when in wash cycle restricted water flow to the point where the washer would error code LF (low flow). Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Frank T Sound Beach , NY July 20, 2023 Leaking water. Replaced the Cold Water Valve/Solenoid. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers
William R Terrell , TX October 04, 2021 Cold water inlet valve failure. Took off the top, replaced valve, reinstalled top Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Samuel O South Portland , ME April 11, 2021 Leaking valve Took apart the washing machine and installed the new water valve. Connected electrical and it worked great. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Adjustable Wrench, Screwdrivers
Kirk H Columbia , MO November 06, 2020 Lf error code. Replaced the cold water valve and now it works fine. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers, Socket Set
Jeffrey Y New Castle , CO November 03, 2020 Appliance: Whirlpool Washer WFW9250WL00 The water level sensor would not allow machine to operate After reading other stories I decided to replace both the sensor and the fill valve. I ordered the parts on Friday thinking I would replace them Monday. I actually received them the next day and replaced them right away. The only challenge was the torque screw holding the fill valve. The screw has a security head button in the center. I had to use pliers to remove it. I then replaced it with a different screw. Everything went very fast. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Ron S Camden Point , MO December 24, 2019 Appliance: Model MAYTAG 2000 Water leaking into the washer Replaced the water valves. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers