Mark F Gainesville , FL January 10, 2019 The control panel had become detached from the range, because the plastic where the screws are inserted had broken in all 4 corners. Pulled the range out from the wall so I could get behind it. Unplugged it and removed the back plate from the range. Unplugged the two connections on the old panel to remove it. Adhered the overlay to the front of the new panel. Plugged it back in and attached it to the range with the 4 screws—careful not to tighten them too tight to avoid cracking the plastic. 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes