Do-It-Yourself Story

I checked the power coming in to the unit and checked the door switch with a meter and found that both were OK. I figured it must be the main power board or the control panel. I researched the problem on-line and found that it was a little more likely that it was the control panel and not the board. I ordered the panel from appliance parts pros and replaced it within 30 minutes. The machine took about 5 minutes (longer than normal) to start up but has been working fine ever since. I also realized that this unit requires maintenance as I also found the bottom spray arm was not working properly. In addition, the accumulator filter had to be replaced since some of the film material was not secure. So the pump was basically pumping particulates back on to the dishes and leaving a film.