Step 1. Turn off water and power to dishwasher. Ours does not have any easy plug under the sink, so this was our first red flag that this was going to be complicated. Step 2. Unscrew dishwasher from cabinet brackets. 3. Dismantle the hardwired box underneath-2 wires, 1 ground. Step 3. Dishwasher would not come out of the cabinet far enough to remove. Step 4. Have a good cry because it's been over an hour now and the directions said this would be easy. Step 5. Use a wrench to detach the water input hose. Curse several times because the wrench space allows for about 5degrees of rotation. Step 6. Pull cabinet out completely and turn on side. Thank YouTube for its helpful videos because otherwise, I am an idiot. Step 7. Replace the drain pump motor piece with a few screws and rewiring fixes. Make sure you don't have any of the correct weird star-shaped screwdrivers to match. Step 8. Turn dishwasher upright and reattach intake hose. Step 9. Stop and pray to Jesus that all your efforts worked and this won't leak. Steo 10. Turn all the water and let back on and run a rinse test cycle. Step 11. It leaks. Step 12. Turn off water and let again. Consider just moving out burning the house down because your in the 3rd hr of repairing this stupid thing and could have washed all the dishes by hsnd by now. Step 12. Detach the water intake hose again, clean the washer, and cross your fingers because you have no idea what size washer you'd need to replace this. Step 13. Repeat all the sheninangans down in the basement. Run another test cycle with something under to detect leaks. Step whatever your on now... No leaks!!! Praise Jesus! Reassemble tbe bottom rack and reattsch to cabinet. Run dishes to see if they get clean. Finish the "easy" project in just under 6 hrs with two people and divine help, then treat yourself to a steak dinner or order pizza and eat off paper plates. The part worked awesome... the rest was a 55 on a scale of 1/10 difficulty.