Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Frigidaire Dishwasher Pump

Best Seller
Frigidaire Drain Pump Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: A00126401

The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It plays a critical role in the dishwasher's operation by removing the used water at the end of each wash cycle, ensuring the machine is ready for the next load. This assembly includes the pump that powers the expulsion of water, along with any necessary housing and fittings to connect it securely to the dishwasher's system.

Causes of a bad part can vary from clogs formed by food particles or other debris, to mechanical failure of the pump motor itself. 

Symptoms of a bad Drain Pump Assembly include:

  • Water not draining properly from the dishwasher
  • Unusual noises coming from the pump area
  • The dishwasher fails to start a wash cycle due to the system detecting water from a previous cycle still inside.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms
  • Will not drain
See more...
Do-It-Yourself Stories from Customers like You Dishwasher was not draining   Bryce K. • Ames , IA • March 16, 2015

After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed. Read more

More
$100.26
Compare At:
$119.31
You Save:
$19.05

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Circulation Pump Motor Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 154844301

The Circulation Pump Motor Kit is an OEM replacement part for Frigidaire dishwashers. This essential kit contains the circulation pump motor, which is responsible for circulating and distributing the water and detergent solution throughout the dishwasher tub during the wash cycle.

Causes of needing to replace the circulation pump motor kit in a dishwasher can include normal wear and tear over time, electrical malfunctions, or physical damage to the pump motor or impeller components due to debris or foreign objects.

Symptoms of a faulty circulation pump motor kit include:

  • Inadequate water circulation or spray arm rotation during the cycle
  • Loud or excessive noise coming from the pump area
  • Leaking or pooling of water around the pump housing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

This part fixes the following symptoms
  • Won't start
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You The dishwasher was going through all its cycles filling with water and discharging the soap dish would open but the soap was still in the tray just wet   Joel C. • West Haven , CT • March 19, 2017

Replaced the pump motor. Works great again. I saw the picture of the part on the website so I knew I was getting the right part and watched the video to see if there were any shortcuts. Easy job. Read more

More
$179.95
Compare At:
$214.14
You Save:
$34.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Motor & Pump Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304519906

The Motor & Pump Assembly is an OEM part for Frigidaire dishwashers. This assembly is crucial for circulating water throughout the dishwasher during the wash and rinse cycles, ensuring that dishes are cleaned effectively.

You should replace this motor and pump assembly if it becomes faulty. Common causes of a bad motor and pump assembly include electrical issues, wear and tear from regular use, or blockages caused by debris or food particles.

Symptoms of a bad motor and pump assembly include:

  • The dishwasher not cleaning dishes properly
  • No water circulation during cycles
  • Unusual noises such as grinding or humming from the pump area
  • Error codes related to motor or pump failure

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Rinse motor not working   Dean A. • Riverview , FL • November 18, 2021

Purchased new motor through Appliance Parts Pros for less than any other site. Received motor and completed job in less than 30 minutes. Dishwasher works perfect. Very happy with repair and part purchased. Read more

More
$82.93
Compare At:
$97.60
You Save:
$14.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Vent Blower Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304523304

The Vent Blower Assembly is an OEM part for Frigidaire dishwashers. It is designed to help ventilate the dishwasher by expelling hot, moist air from the interior after the washing cycle. 

You should replace the vent blower assembly if it becomes faulty. Causes of a bad vent blower assembly can include regular wear and tear, blockages from debris, or electrical issues. A malfunctioning vent blower can lead to poor drying performance and excessive moisture inside the dishwasher.

Symptoms of a bad vent blower assembly include:

  • Dishes not drying properly after the wash cycle
  • Excessive moisture or condensation inside the dishwasher
  • Unusual noises coming from the vent blower area
  • The dishwasher emitting warm, moist air less effectively

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You I had an error message on my frigidaire gallery dishwasher er ov   Michael S. • Carteret , NJ • July 26, 2014

I had an appliance repair guy come and he told me it was possibly the vent assembly but if changing it didn't fix the problem it would be the control board next. He felt it was not worth the money to repair because he would have to disconnect everything just to get to the vent on the right rear top of the dishwasher. When i took the DW out thinking i had to buy a new one i saw this part was stuck open and covered in limescale deposits and grime.I ordered the part from appliance pros and payed... Read more

More
$86.95
Compare At:
$104.34
You Save:
$17.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Drain Pump Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 154580301

The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It is responsible for removing wastewater from the dishwasher tub during the drain cycle, ensuring that the dishwasher operates efficiently and effectively.

Causes of a bad drain pump assembly can include clogging from food particles and debris, damage to the pump impeller, or electrical failures within the pump motor. Over time, regular use can lead to wear and tear that affects the pump's performance.

Symptoms of a bad drain pump assembly include:

  • Water not draining from the dishwasher
  • Standing water at the bottom of the dishwasher after a cycle
  • Unusual noises during the drain cycle
  • Error codes related to drainage issues

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Will not drain
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Standing water in the bottom of dishwasher after the load was finished.   John W. • Sicklerville , NJ • July 14, 2017

I very seldom respond to requests for feedback like this but definitely feel moved to do so in this case. When our 8 year old dishwasher started acting up my initial reaction was to simply replace it. I wasn't sure what was wrong, nor if I would be able to find the right part once I did figure out the problem. The troubleshooting advice on this website was spot on and I quickly figured out what needed to be replaced. The repair videos were easy to follow and the parts were here two days... Read more

More
$56.23
Compare At:
$66.35
You Save:
$10.12

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Drain Pump Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: A00126501

The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It is responsible for removing water from the dishwasher tub during the drain cycle, ensuring that water is properly expelled to complete the washing process.

Common causes of a bad drain pump assembly include clogs from debris or food particles, electrical issues like a burnt-out motor, or damage due to improper installation or handling.

Symptoms of a bad drain pump assembly include:

  • Water not draining from the dishwasher
  • Unusual noises during the drain cycle
  • Error codes indicating drainage problems
  • Water leaks from the pump area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Will not drain
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Dishwasher wouldn't drain   Myrna L. • Williamston , SC • June 03, 2014

Looked up and found the part on Appliance PartsPros.com and fixed the problem for less than $50 and a minimum of trouble. Works great now! Read more

More
$81.49
Compare At:
$97.79
You Save:
$16.30

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Circulation Motor
Genuine Frigidaire part
By: Frigidaire
Part Number: 154853801

The Circulation Motor is an original and genuine OEM replacement part for Frigidaire dishwashers. It circulates water throughout the wash and rinse cycles to clean all dishes.

Causes of a bad circulation motor include normal wear and tear over time, the mineral buildup that causes mechanical issues, or damage from overfilling the dishwasher with an unbalanced load.

Symptoms of a bad circulation motor are:

  • Dishes only partially cleaned with dirt and food soils still stuck on
  • Incomplete water coverage inside the dishwasher tub
  • Puddles of standing water after a cycle
  • Abnormally long cycle times

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Westinghouse, and some Kenmore dishwasher models.

Do-It-Yourself Stories from Customers like You Loud noise when running   Dallas L. • Blackfoot , ID • February 09, 2018

I started looking at new dishwashers and was quickly disheartened with the cost of these simple machines. There's really not much to them and yet they're so much money for what they do. I popped off the pump and took a look at it and cleared some "gunk" and hair out but it didn't fix the issue. Jumped on AppliandPartsPros.com and ordered the pump on a Friday night and had the part in hand Tuesday night after work. Took about 10 minutes total (dishwasher out and back installed, literally in... Read more

More
$237.26
Compare At:
$282.34
You Save:
$45.08

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Motor Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 154844101

Due to manufacturer changes, part may differ in appearance and will include two o-rings.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Bad bearing in motor on dishwasher. Very loud.   Larry B. • Azle , TX • March 31, 2014

Diagnosed the problem. The pump motor needed to be replaced. Took model number and looked part up on Appliance Parts Pro site and found the exact part. Ordered part with next day delivery . Part arrived as scheduled. Simple installation. Works like new. Thanks. Read more

More
$211.53
Compare At:
$253.84
You Save:
$42.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Sump Cover And Filter
Genuine Frigidaire part
By: Frigidaire
Part Number: 807111601

The Sump Cover and Filter is an OEM part for Frigidaire dishwashers. Located inside the bottom of the tub, it seals off and protects the drainage sump where debris collects after each wash cycle. The attached mesh filter screens out particles that could otherwise clog drain lines.

Causes can involve mineral buildup that blocks the filter mesh over time, cracks in the plastic housing exposing the sump, or a missing or damaged filter that fails to trap solids.

Symptoms of a bad sump cover and filter include:

  • Standing water inside the bottom of the dishwasher tub
  • Reduced drainage or water removal after cycles complete
  • Floating debris trapped near the drain pump area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

Do-It-Yourself Stories from Customers like You The issue with my dishwasher was it would not drain the culprit the pump motor.   Della S. • Bellevue , MI • October 05, 2021

I followed the video instructions that is on the website and was able to replace the motor easily and in 15 minutes maybe less. Read more

More
$25.95
Compare At:
$30.88
You Save:
$4.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Circulation Pump Motor
Genuine Frigidaire part
By: Frigidaire
Part Number: 154859101

This is a circulation pump motor for dishwashers. It controls the main pump of the appliance.The pump is directly responsible for removing extra water from the dishwasher after use. When a dishwasher's circulation pump motor goes bad, the main indicator is usually leaking from the appliance. There will be a noticeable amount of water emerging from the bottom of the machine whenever the cycle is engaged. Unplug the dishwasher from its main power source and water hookup. Remove the dishwasher from its space in the counter. Remove all necessary entry plates to access the interior of the dishwasher. There is a metal bracket holding the current motor in. Unscrew the two screws that secure the bracket and remove this component. Remember which way the motor is oriented before removing it. Unplug the power cable connecting the motor to the dishwasher. Put the two new sealing rings on the new pump motor. Repeat these instructions in reverse to install the new part.This Frigidaire dishwasher circulation pump motor is a genuine OEM replacement part sourced directly from Frigidaire. The pump motor is sold individually. This part is compatible with Frigidaire, Kenmore, Westinghouse, and Gibson appliances.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Circulator pump and drain pump   Nick T. • Milton , PA • January 19, 2015

Could not have went better. The girl in customer service verified all my parts prior to my ordering. I paid for next day shipping and they arrived on time. Exact replacement items for our Frigidaire dishwasher. Will give all of my future business to Appliance Parts Pros. One precaution...when manually entering my model number on the website, incorrect part numbers were displayed. Make sure you have their online chat representatives verify your parts and you will be good to go. Read more

More
$196.95
Compare At:
$234.37
You Save:
$37.42

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Pump
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304483444

This replacement pump moves water/condensate through your appliance so it can drain or recirculate as designed. Replacing a weak or failed pump restores proper water removal and helps prevent leaks, overflows, or nuisance shutoffs.

  • Moves collected water from the sump/collection area to a drain hose or internal passage
  • Maintains correct water level to prevent overflow conditions
  • Common failure signs: water won't pump out, leaks near the base, or loud buzzing/grinding from the pump
  • May trigger "bucket full," drain, or pump-related error indicators, depending on the model
What's included: 1 pump Installation notes:
  • Disconnect power before servicing; allow unit to cool, and expect residual water in the lines or pan
  • Note hose routing and wiring connections; transfer any clamps, grommets, or fittings from the old pump if reused
  • Ensure hoses are fully seated and not kinked; tighten connections and check for leaks after reassembly
  • Test operation after installation and water is expelled properly

Do-It-Yourself Stories from Customers like You Failed drain pump   Russell P. • Gold Canyon , AZ • October 07, 2016

I drained the dishwasher by hand, disconnected power, water, and drain under the sink. I removed the screws holding the dishwasher in place. I located the pump with the online owners manual and removed it leaving the power connected. I put the machine on the rinse cycle and then hit cancel, the pump is supposed to come on, it didn't, I tried it twice, each time it would start if I manually started it spinning. So I ordered a new drain pump and reversed the removal procedure. Everything worked... Read more

More
$132.21
Compare At:
$156.01
You Save:
$23.80

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Circulation Pump Motor Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 154859201

Includes motor, two o-rings and wire harness.

Do-It-Yourself Stories from Customers like You Frigidaire dishwasher made extremely loud noise when running after quietly filling up   Michael B. • Palm Desert , CA • March 25, 2016

Because the dishwasher made noise only when washing or rinsing, and not when filling, the problem was correctly diagnosed as a faulty circulation pump. Although not difficult, it took more time to remove the dishwasher from under the counter and to reinstall it (approximately one hour) than it took to swap out the circulation pump (5 minutes). The pump swap involved only 2 mounting screws and an electrical connection plug. The pump was ordered on Saturday, shipped on Monday, and received in... Read more

More
$201.95
Compare At:
$242.34
You Save:
$40.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Drain Pump Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: A00044305

This drain pump assembly removes water from the tub at the end of wash and rinse cycles, helping your appliance complete cycles and prevent standing water.

  • Pumps wastewater out through the drain hose to the household drain
  • A failing pump can cause slow or no draining, cycle interruptions, or error codes related to draining
  • May also present as water left in the tub or an inability to start the spin/drain portion of a cycle
What's included: One drain pump assembly Installation notes:
  • Unplug appliance and shut off water supply before service
  • Have towels or a pan ready—residual water will drain when hoses are removed
  • Note wire and hose orientations before disconnecting; transfer any mounting hardware from the original if reused
  • After installation, check for leaks and run a short drain cycle to verify operation

More
$99.95
Compare At:
$118.94
You Save:
$18.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Drain Pump
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304524920

The Drain Pump is an OEM part for Frigidaire dishwashers. It is responsible for removing water from the dishwasher tub at the end of each cycle. The drain pump works in conjunction with the drain hose to efficiently expel dirty water and ensure dishes are thoroughly dried.

Symptoms of a bad drain pump include:

  • Water not fully draining out of the bottom of the dishwasher tub
  • Puddles or standing water left inside after a cycle is finished
  • Mildewy or musty smells emitting from the appliance
  • Loud or grinding noises coming from the drain pump motor area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Would not drain.   Jack J. • Johnstown , NY • October 23, 2017

Ordered a new pump and installed, took about 15 min. Reinstalled the dishwasher and tested still not draining. Disassembled and checked for pump power and found no problem. Removed drain hose from pump housing and found a blockage cleaned out blockage and hooked up the shop vac to drain hose under sink and made sure it was clean. Reassemble and reinstall with old pump, works great! Guess I now have a spare pump in stock. Read more

More
$177.33
Compare At:
$211.02
You Save:
$33.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Sump Assembly (Dishwasher Pump Housing)
Genuine Frigidaire part
By: Frigidaire
Part Number: 154728201

This sump assembly is the dishwasher's lower-tub pump housing that circulates and drains wash water. Replacing a cracked or clogged sump restores proper drain and circulation, helping stop leaks and restore normal wash performance. What it does:

  • Houses the pump and channels wash water for circulation and draining.
  • Restores proper drainage when the dishwasher won't drain or holds water in the tub.
  • Stops leaks that develop from cracked or damaged sump housings at the base.
  • Reduces pump noise or grinding caused by debris, cracks, or a failing housing.
What's included: One sump assembly. Install notes:
  • Disconnect electrical power and water supply before beginning any service.
  • Access the sump from the dishwasher's lower front (remove the lower rack and toe-kick/access panel as needed).
  • Take care with wiring and hose clamps; transfer any motors, seals, or fittings only if required and follow manufacturer torque/placement.
  • After installation, run a short cycle and inspect for proper drain/circulation and any leaks before reassembling trim.

More
$45.95
Compare At:
$54.22
You Save:
$8.27

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Pump
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304470276

 

More
$116.95
Compare At:
$140.10
You Save:
$23.15

IN STOCK
Ships Today Guaranteed
Add to Cart

Frigidaire dishwasher pump replacement parts are essential to ensure your kitchen cleanup routine remains efficient. These parts are crucial in maintaining or restoring the functionality of your Frigidaire dishwasher.

Your dishwasher plays a vital role in keeping your dishes spotless, and the pump is at the heart of its operation. The Frigidaire dishwasher pump helps circulate water and detergent, ensuring a thorough clean every time. Without a well-functioning pump, your dishwasher's performance can drastically decline. This is why accessing high-quality Frigidaire dishwasher pump parts is so important.

Investing in OEM Frigidaire dishwasher pump replacement parts guarantees compatibility and reliability. These parts are designed to work seamlessly with your specific model, ensuring they fit perfectly and function optimally. You won't have to worry about issues arising from ill-fitting or subpar components.

If you're looking to keep your Frigidaire dishwasher in top shape, rest assured that quality, compatible replacement parts are readily available. Keeping your appliance well-maintained has never been easier.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store