Do-It-Yourself Story

Replaced the electronic control board. Was relatively easy once I figured out how to get into where the control panel was located; videos supplied were for a different model. Basically, unplug connectors, pull 4 screws, replace board and 4 screws then replug in connectors. I would suggest taking pics of all connectors before taking apart to make sure all get put into the correct place (8-9 total connectors). The wires are color coded but several plugs are the same size so it will make putting back together a faster task. Most difficulty of this replacement is removing the wall oven from the cabinet. I pulled mine out only far enough to gain access to the back of the touch pad and supported it with a 5 gal. bucket. Also, make sure to keep yourself grounded by staying in contact with a metal portion of the oven to prevent static damaging the new control board.