Do-It-Yourself Story

We unscrewed the screw on top of the vent and took the vent off. Next we lifted the door off at the pin hinges. We should have taken pictures of disassembly. The black inner door plate was taken off next with a screwdriver being careful not to crack it. I think this gave us access to the door handle screws and we removed them. The old outer door panel was pried off being careful not to drop the glass. We laid the glass on the place it was before making sure it was far to the left-using a screwdriver through the hole and pulling down. It was difficult to get the glass under the plastic clips in the frame. The glass had to be far enough down from the hole to allow the door handle to fit in it. We got confused about the holes in the front panel thinking the door catch didn't fit into them but realized that was where the handle went. If we could replace the front panel anyone could. It looks and works great now.