Unplug the washer, remove the top, unscrew the control panel, do not unplug it, remove the detergent drawer, clean, remove the trap panel, clean, remove the outer door gasket clamp, unplug the door latch connector, unscrew the front panel, remove the front panel, remove the top hose, remove the inner door gasket clamp, remove door seal, clean around drum and seal seats remove fitting from old seal, and clean. install fitting in new seal, set inner seal into place, a little soft soap helps here, install inner clamp, reconnect hose to top of seal, reinstall front panel, reconnect door latch connector, position seal on front panel, a little soft soap helps here. install outer door clamp, reinstall the trap panel, re insert the detergent drawer, re connect the control panel, reinstall the top, plug in washer and run a cycle to check for leaks,