Roman M Tucson , AZ October 11, 2014 The heater element wouldn't go on This is the electric SS stove without bottom drawer and control knobs are on front of the stove facing you, can't find the model # handy since it was a job site Replaced the switch, the front panel which holds all switches is tricky to be removed for inexperienced. You can pull the front panel only so much otherwise you'll disconnect the PC board cable by pulling more. Unhook top or bottom first after removing screws from the front panel and you have some space for hand to hold on the switch presuming power has been disconnected first. Hidden screws on right and left and also under each side. Needle nose pliers and sensitouch is helpful removing/reinstalling wire connectors in the proper order naturally. Any loose connector can be pinched a bit carefully by pliers to get proper tension otherwise that spot may burnout. 8 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes