Do-It-Yourself Story

Turned off the water and electricity, then removed the front panel. Raised the front of the washer.Positioned a towel to catch the water, then loosened the hoses from the pump. Pushed the motor over to loosen the belts and then removed them. Removed the old pump and installed the new one in the same position. Put the new belts in position and again moved the motor and slid the motor and installed the belts on the pulley. Put new clamps on the hose and attached them to the pump. Turned on the water and electricity, checked for leaks. Lowered the machine and reinstalled the front panel.