Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Maytag Washer Belt

Best Seller
Maytag Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10006384

The washer drive belt transfers motor power to the washer’s drive system so the basket spins and agitates. Replacing a stretched or broken belt helps stop squealing and slipping so cycles finish at proper spin speed.

What it does

  • Links the drive motor to the washer’s drive/pulley system
  • Restores spin and agitation when the belt is worn, glazed, or broken
  • Can reduce squeal or burning-rubber smells from belt slip
  • Helps prevent intermittent or no-spin conditions

What’s included
One drive belt.

Install notes

  • Unplug power; turn off water
  • Tip the washer back; remove the bottom shield/cover if present
  • Route the belt over the motor and drive pulleys; rotate by hand to seat fully
  • Inspect pulleys/drive parts for wear; run a spin or calibration test after install

This OEM Whirlpool belt is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

Do-It-Yourself Stories from Customers like You Whirlpool Cabrio washer made a loud noise during the spin cycles it also was very noisy while washing   Ralph N. • Spring , TX • October 25, 2018

This was my first attempt, ever, to repair a washing machine. After some internet research on the problems, I was able to determine that the shaft seal on the gearcase probably was leaking water into the gearcase with each use. No water was ever found on the floor, but when I turned the washer over to inspect the gearcase, I found a black, oily residue on the outside of it along with the same residue on the pulleys, the belt and the motor. I ordered a new gearcase, shift actuator, splutch... Read more

More
$28.26
Compare At:
$33.63
You Save:
$5.37

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Pump And Drive Belt Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12112425

The Pump and Drive Belt Kit is an OEM replacement part for Whirlpool washing machines. The Pump and drive belt kit is responsible for helping to drain water from the washer drum during the wash cycle. The pump and drive belt kit works by powering the washer's pump to remove water from the drum and out of the washer. The drive belt provides the power to turn the pump, while the pump helps to drain the water. The kit includes 1 pump belt and 1 drive belt.

This part fixes the following symptoms:

  • Standing water in the washer drum
  • Ineffective or non-existent water drainage
  • Potential water damage or flooding caused by a faulty pump or drive belt

Causes of needing to replace the pump and drive belt kit include normal wear and tear over extended use, exposure to debris or foreign objects, or physical damage from impact or mishandling.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models. 

This part fixes the following symptoms
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Maytag clothes washer would not spin or drain   Ben M. • Wallingford , CT • September 29, 2018

The washer was on, and I heard a faint humming sound in the laundry room. I went in and opened the washer and it was full of soapy water in the middle of its cycle and was not agitating. I also smelled a faint burning smell. At this point I figured the problem was a bad motor, as the washer is more than 20 years old. I have fixed it twice before, because the first time, the repairman said I should keep this washer going as long as possible. It was made to last with a metal drum, unlike newer... Read more

More
$32.43
Compare At:
$44.49
You Save:
$12.06

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21352320

The Washer Drive Belt is an OEM part for Whirlpool washing machines. It is crucial for transmitting the power from the motor to the drum, enabling the washing machine to tumble and spin during the wash and spin cycles. The drive belt wraps around the motor and drum pulleys, providing the necessary traction and tension to operate efficiently.

Causes of a bad Washer Drive Belt can include stretching over time, which reduces its efficiency to grip the pulleys properly, or fraying and cracking due to age and normal wear and tear. Misalignment or improper installation can also lead to premature belt failure.

Symptoms of a bad Washer Drive Belt include:

  • The washing machine failing to spin or agitate.
  • A burning smell or unusual noises during operation, indicating slippage or rubbing.
  • Visible signs of wear like cracks, fraying, or noticeable looseness on the belt.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Burning smell
  • Will not agitate
  • Spins slowly
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You The drive belt on my maytag washing machine was worn out   Donnie B. • Campobelly , SC • July 23, 2014

I Purchased a new belt and replaced it. If I had not watched the video telling me how it is done the job would have been much more difficult. After watching the video I changed the belt in less than 2 minutes. I ordered the belt from Appliance Parts Pros and got it the next day. I am thankful that when I started my search I landed on your web site. Thanks for the quick service and the video. Read more

More
$15.95
Compare At:
$23.33
You Save:
$7.38

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003483

The Washer Drive Belt is an OEM part for Whirlpool washers. This belt connects the washer's motor to the drum, enabling the drum to rotate during the wash and spin cycles. It plays a crucial role in the washer's operation.

Causes of a bad washer drive belt can include wear and tear, stretching, or damage from overloading the washer.

Symptoms of a bad washer drive belt may include:

  • Drum not spinning or agitating.
  • Unusual noises coming from the washer during operation.
  • Belt slipping or appearing worn.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Loud knocking and rattle while in spin cycle.   Daniel K. • Grafton , WI • July 30, 2017

18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and... Read more

More
$32.95
Compare At:
$39.21
You Save:
$6.26

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: W11239857

The Drive Belt is an OEM part for Whirlpool washing machines. This belt works to spin the washing machine tub and agitate clothes during cycles. It transmits rotational power from the motor to the inner tub and outer tub.

Causes of a bad drive belt can include wear and over time usage, exposure to harsh detergents or fabric softeners that may cause premature wear and cracking, or damage from overloading the washer.

Symptoms of a bad drive belt include:

  • The washer tub not spinning or rotating very slowly
  • Loud squealing, squeaking or grinding noises when operating
  • The belt slipping off the pulleys
  • Vibrating that causes the washer to walk or move during cycles

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The metal om metal sound at the end of the spin cycle. Also found gearcase oil covering the inside of the drive belt plastic cover.   Harry S. • Belvidere , NJ • May 23, 2023

Replaced the Gearcase assembly which is a sealed unit that is not serviceable. Also replaced the clutch and belt because they were covered in gearcase oil. Read more

More
$44.95
Compare At:
$53.04
You Save:
$8.09

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10388414

The Drive Belt is an OEM part for Whirlpool front load washing machines. It transmits power from the wash motor to rotate the tub assembly, tumbling clothes during cycles. The belt is designed with deep grooves to securely grip the motor and tub pulleys. It measures 48.22” long uninstalled and will stretch to 51.53” when installed.

Causes of a bad Drive Belt can include cracks developing from repeated flexing during operation or stretching over many years. Debris trapped in the belt path can also wear down the belt prematurely.

Symptoms of a bad belt include:

  • The washing tub failing to spin or agitate clothes
  • Abnormally loud squealing noises from inside the machine
  • The belt slipping off pulleys during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, and select Kenmore front load washers.

This part fixes the following symptoms
  • Burning smell
  • Will not agitate
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Drum not turning   Paul H. • Seattle , WA • December 13, 2019

I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive... Read more

More
$55.95
Compare At:
$66.58
You Save:
$10.63

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Belt And Isolator Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001788

The Belt and Isolator Kit is an OEM part for Whirlpool washing machines. This kit includes a drive belt and isolators that work together to transfer motion from the motor to the washer drum while dampening vibrations. 

Over time, the belt can wear out, stretch, or break due to regular use, heavy loads, or friction. The isolators may also deteriorate, losing their ability to absorb shocks effectively.

Symptoms of a bad Belt and Isolator Kit include:

  • The drum not spinning or agitating
  • Excessive vibration or noise during operation
  • The washer failing to start or complete cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not agitate
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Noisy spin cycle   Gregory E. • Halifax , PA • April 17, 2017

I just wanted to put my experience here for all to see. I have a Maytag Neptune, MAH5500BWW, one of the original ones. I bought it back in 2002 and it has done many many loads of wash faithfully. So when the bearings started to get loud I thought it best to replace them, the seal kit and the belt. I did my research as best I could and decided to order the OEM parts from an appliance supplier. If you are replacing the bearings, watch on line videos prior to performing the job. It will... Read more

More
$28.95
Compare At:
$34.45
You Save:
$5.50

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540101

The Drive Belt is an OEM part for Whirlpool washing machines. It transmits power from the washer motor to the tub, causing it to rotate during wash and spin cycles

Causes of a worn drive belt can include repetitive cycles over years of use. The belt undergoes stress each time the tub is set in motion. Damage from slipping off pulleys during operation can also affect the belt.

Symptoms of a bad drive belt include:

  • The tub failing to turn or rotate during cycles
  • Abnormal noises coming from the drive system
  • Looseness, cracks, or visible wear to the drive belt itself
  • Reduced tub movement even when the cycle is running

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Broken belt   Victor A. • Davenport , IA • July 07, 2014

Using a nut driver I removed the sheet metal screws, removed the old belt and replaced it with the one. An easy repair. Shipping was EXCELLENT! Read more

More
$40.95
Compare At:
$49.14
You Save:
$8.19

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP27001007

The Drive Belt is an OEM component specifically designed for Whirlpool brand clothes washers. It connects the transmission pulley to the drive motor pulley, transferring power to turn the wash basket.  This belt measures approximately 30 1/4 inches. 

Causes of a problematic belt include cracks and breaks from prolonged cyclic loads. Lint or debris lodged in the belt can damage it prematurely as well.

Symptoms of a faulty drive belt include:

  • The wash basin fails to agitate or spin clothes
  • Loud squealing sounds occur during use

Compatible models include some brands produced by KitchenAid, Maytag, Jenn-Air, and Kenmore as well.

This part fixes the following symptoms
  • Burning smell
See more...
Do-It-Yourself Stories from Customers like You Noisy washer due to bad main bearing assembly caused by water leak of the tub   Sotirios P. • Placentia , CA • October 16, 2014

I decided to repair my Amana LWA50AW top loader washer because it has served us well, it is made by Speed Queen and an equal replacement is expensive. These are very dependable washers. The parts I ordered were: part #R9900552 (hub and seal kit) This kit does not include the Tub or Main bearing!!! Nor the drive belt!!! The main bearing is what is attacked by the water due to leaks and makes a jet engine sound as the tub spins faster and faster. Any way, the kit should be updated to include... Read more

More
$47.95
Compare At:
$56.58
You Save:
$8.63

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: W11213879

The Belt is an OEM part for Whirlpool washing machines. It is a crucial transmission component that connects the motor to the drive system transmitting power to the tub. During rotation, the belt spins the tub and agitates or extracts water as needed. 

Causes of a bad belt include general wear and tear over time, exposure to abrasive debris, or damage due to seizing components.  

Symptoms of a failed or slipping belt include:

  • Abnormal vibrations or noises during the operation
  • Slow or inefficient agitation or spin cycles   
  • The tub fails to turn despite a running motor

Replacing with a new OEM belt restores lost power ensuring efficient, balanced operation. Extend the life of your washer with this genuine Whirlpool part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Gear case failed and would not spin the wash basket and leaked oil.   Jason K. • Neosho , WI • July 21, 2023

I followed the AppliancePartsPros.com video where the gear case was replaced on a similar model, which gave me the confidence to replace the gear case on my washer. Read more

More
$21.95
Compare At:
$26.34
You Save:
$4.39

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Maytag Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10388418

This is a drive belt that is part of the internal structure of many washing machines. It works with two different pulleys and a drive motor to ensure the washing machine spins. As the washing machine is used, the drive belt can experience wear and tear. If the drive belt is worn or damaged, it can begin to make strange noises. The drive belt can also come loose or unevenly worn and will need to be replaced.A screwdriver, a wrench, and work gloves may be needed to replace the drive belt. Unplug the washing machine and shut off the cold and hot water valves before moving the washer forward. Remove the back panel by taking out the screws and lifting the panel away. Take the old belt off of the pulleys and install the new belt. Make sure to reassemble the washer and turn on the power and water before use.This part is designed to be used with washing machines manufactured by Maytag and Whirlpool. It is sold as an individual item. The drive belt is an authentic OEM replacement component that is directly sourced from the manufacturer.

Do-It-Yourself Stories from Customers like You Loud banging noise and burning smell   Ken D. • Arizona City , AZ • December 07, 2016

Tub bearing failure, basically the whole machine has to be taken a part. I've used appliancepartspros in the past so I came back. Quick shipping, parts ordered Thursday night and got here Monday. Take your time or you'll just cost yourself more money. I was lucky in that I did not have to buy the $568 inner tub because I found a bearing and seal kit on Amazon for $80. Historically appliancepartspros' website has been very accurate indicating in stock or not. It appears those days are gone. I... Read more

More
$54.95
Compare At:
$65.39
You Save:
$10.44

IN STOCK
Ships Monday Guaranteed
Add to Cart
Maytag Insulated Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10260319

This insulated belt secures the appliance's insulation blanket around the cavity, helping maintain proper temperatures and shielding surrounding components. Replace a torn, stretched, or missing belt to restore correct insulation retention and reliable performance.

  • Holds the insulation wrap in its designed position
  • Helps contain heat and reduce transfer to outer panels
  • Supports thermal efficiency and stable cavity temperatures
  • Common reasons to replace: belt frayed, stretched, or missing; insulation slipping out of place
What's included: 1 insulated belt Installation notes:
  • Disconnect power and allow the appliance to cool completely before servicing
  • Access the insulation area by removing panels or the unit from its enclosure as needed
  • Wear gloves and eye protection when handling fiberglass insulation
  • Route and secure the belt as originally installed; do not overtighten or compress insulation excessively

Do-It-Yourself Stories from Customers like You Belt   Jessica G. • Yucca Valley , CA • April 09, 2015

Replaced the belt and works GREAT Read more

More
$48.95
Compare At:
$57.76
You Save:
$8.81

IN STOCK
Ships Monday Guaranteed
Add to Cart
Maytag V - Belt Ii (Xpz 1137 Lw)
Genuine Whirlpool part
By: Whirlpool
Part Number: 23003586

 

More
Maytag V - Belt (10X1700)
Genuine Whirlpool part
By: Whirlpool
Part Number: 23003525

 

More

Finding reliable Maytag washer belt replacement parts is crucial for any household that depends on their trusty washing machine to keep clothes clean and fresh. These parts might seem small, but Maytag washer belts contribute significantly to the overall performance of your appliance by ensuring the drum spins correctly and operates smoothly.

When it comes to replacing these essential components, opting for OEM Maytag washer belts is often the best choice. OEM parts are designed and tested by the original manufacturer, ensuring perfect compatibility and upholding the high standards of quality your Maytag washer was built with. By using these genuine parts, you effectively prolong the lifespan of your appliance, maintaining its reliability and efficiency without a hitch.

So, if you're ever in need of Maytag washer replacement parts like belts, rest assured you can find high-quality options that will keep your washing machine running like new.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store