Mark B Fairview Park , OH January 10, 2015 Loud noise during spin cycle The main bearing is built into the transmission. Our unit was extremely loud during spin cycle and I suspected a bad bearing. Upon disassembly I found that the tub seal was leaking and water got into the bearing. Tell tail sign is grease splatter in the bottom side of the tub ( about 10" round metal area) Agitator took some effect to jar loose as did the tub nut All in all this is a pretty straight forward repair if you follow the video. To replace this washer is right around $1,000 and this repair cost about $150. Now is quieter than ever! Thanks appliance parts.com! 42 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes