In short, ordered the parts then installed the parts. The pump never leaked or left water in the machine. I did view the video on your web site for the pump installation. The information for the pump was straight forward and helped with the motivation. Now the machine no longer has an annoying vibration. The dispensing valve assembly was straight forward. Two electrical connectors, two hoses and two screws. The hardest part was cleaning the dispensing plate. I couldn't take it out whole. This was due to the frame that supports the tub being in the way. I made one attempt at removing the frame and found what looked like a simple process was deceivingly hard. The only option was to disassemble the plate from the tray inside the machine. Which was way easier then removing the support frame. After that everything went smoothly.