Carl S Dieterich , IL May 05, 2014 Appliance: Frigidaire Frtld Wshr - Frigidaire FWT645RHS0 Bad solenoids on bleach and softener dispenser It is a simple fix with removing the old by disconnecting connecters to the solenoids. removing two screws, disconnect the hoses entering and leaving the dispenser. Installing it is simply a reverse of the removal. Total time was certainly less than 30 minutes. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
Suzette C Visalia , CA September 26, 2020 Kenmore washer would not drain would not dispense fabric softener Kenmore old! But we had built a counter above it that would have to be replaced if we purchased new. We ordered a pump & dispenser valve. Parts arrived very quickly and solved the problems. Thank you so much! Chuck & Suzette Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Gilmore P Whittier , CA January 26, 2020 Pump noise & no softener dispensing In short, ordered the parts then installed the parts. The pump never leaked or left water in the machine. I did view the video on your web site for the pump installation. The information for the pump was straight forward and helped with the motivation. Now the machine no longer has an annoying vibration. The dispensing valve assembly was straight forward. Two electrical connectors, two hoses and two screws. The hardest part was cleaning the dispensing plate. I couldn't take it out whole. This was due to the frame that supports the tub being in the way. I made one attempt at removing the frame and found what looked like a simple process was deceivingly hard. The only option was to disassemble the plate from the tray inside the machine. Which was way easier then removing the support frame. After that everything went smoothly. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Pliers, Screwdrivers