Determined the heat coil was broken (open) by using an ohm/multi meter. As this was a Maytag dryer (MEDB725BW0) the disassembly is significantly different than the AppliancePartsPros.com provided video. A putty knife is required to release the top where then the front can removed (raised up and leaned back) and then the drum. At this point access to the heating element assembly for replacement is easy. A note should be added to pay attention to the clip (Flange, heater box) connecting the assembly to the rear of the dryer. I would advise having the repair person have the illustrated parts diagram available. On this model I found it easier to remove the back of the dryer to reinstall the drum belt. A final recommendation would be to take advantage of the opportunity to clean the lint out of the exhaust vent while the dryer is disconnected.