Chuck M Medina , OH November 03, 2015 Appliance: Model KUDS30LXSS7 The sensor touch panel wouldn't always function i had to shut off breaker for a minute then turn back on so it maybe would start Replaced with the panel I bought here. It took about 15 minutes. You do not have to remove the whole front panel.Once you remove the screws (torx head) leave the lower 2 screws real loose.The panel can be removed after that. The replacement panel had a piece of double sided tin foil tape applied over 2 slots in the lower section.This was how the manufacturer stopped the heat and humidity from getting to the PC board and causing it to short out prematurely. Mine had actually acted up in the first 30 days. But when I figured out all I had to do was remove the power for a minute and it would reboot I didn't bother for a warranty call. It made it 3years before I had to replace it. We ordered it Thursday evening and it arrived early Saturday morning .FANTASTIC 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes