Kitchenaid Dishwasher Touch Pad

The Touchpad and Control Panel is an OEM replacement part specially designed for Whirlpool dishwashers. It houses the digital controls and interface that allow for programming and settings. The touchpad is responsible for receiving input signals from users to operate the dishwasher.

Symptoms of a bad touchpad and control panel include:

• Unresponsive or non-functional buttons
• Glitches when scrolling through options
• Touchscreen failures or freezes
• Faulty number pad that won't enter times

Causes of a bad touchpad and control panel include liquid damage from accidental spills, loose or faulty internal wiring from years of use, or physical impact that distorts electronic pathways.

This OEM Whirlpool replacement is compatible with additional countertop brands such as Maytag, KitchenAid, and some Kenmore models.

Color: Black

Color: Black

Color: Stainless

Color: Black

This genuine OEM part is a touchpad control panel assembly for dishwashers. The touchpad control panel assembly is the plastic piece that houses the selection buttons of the dishwasher that control the desired setting of the washer. If the touchpad control panel assembly is no longer responsive to touch, it will need to be replaced.To replace this part, start by turning off the power to the appliance. Then take a screwdriver or putty knife to release the control panel from its locking tabs. Pull up gently to pry the control panel out of its place. Once removed set it to the side, and remove the wire harness and any individual wires that are attached to the control panel. Once removed, place the wires into the new unit in their correct terminals. Snap the new control panel assembly into its proper position and restore power to the dishwasher. This authentic replacement part is sourced directly from the manufacturer and is sold individually. It is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dishwashers.

Color: Black

Color: Black

This user interface mounts in the dishwasher door and contains the keypad you press to choose cycles and options. Replacing a failing UI restores responsive controls and reliable communication with the main control so the cycle can start and run.

• Interprets button presses and sends signals to the electronic control to run the selected cycle
• Common symptoms: unresponsive or intermittent buttons, won't start, erratic lights/beeping, or only certain options work
• Issues may stem from moisture intrusion, a worn keypad, or a damaged ribbon connection

• Disconnect power at the breaker before servicing
• Open the door and remove inner-door/console screws to access the UI; support the panel to avoid strain
• Handle the ribbon cable carefully and observe ESD precautions; transfer any clips/insulators from the old part as needed
• Reassemble and test keypad functions before final tightening

This control panel replaces a cracked, worn, or unresponsive console so your appliance can reliably accept cycle and option selections again, restoring a clean appearance and smooth button action.

• Provides the interface area for selecting cycles and options
• Houses and aligns user-interface components and mounting hardware
• Protects and routes the UI connector/ribbon, when present
• Restores proper fit and finish on the front/top of the unit
• Typical symptoms: cracked or broken console, buttons binding or sticking, worn labels, or selections not registering when the touchpad is integrated into the console on your model

• Disconnect power to the appliance before servicing
• Remove screws to access the console; note hardware locations and wire/ribbon routing, and use care around sharp edges
• Handle any ribbon/IDC connectors by the stiffener; seat fully and level
• Transfer any reusable clips, brackets, or overlays/nameplates from the old panel; test keys before final reassembly

Color: White

Color: Black

Console assembly replaces the appliance's front control panel, restoring a secure housing for the buttons and user interface so you can operate the machine reliably and protect internal electronics. What it does:

• Houses the user controls, button pads and display and provides the mounting location for the control board.
• Replaces cracked, broken or faded panels that make buttons hard to use.
• Addresses symptoms such as missing, sticky or hard-to-press buttons and visible console damage.
• Protects internal electronics from dust and impact while keeping controls accessible.

• Disconnect power to the appliance before beginning work to avoid electric shock.
• Follow the OEM service manual for disassembly and reassembly steps; console removal typically requires removing trim and fasteners.
• Handle display ribbons, connectors and the control board with care to avoid damage.

This is the adhesive label that covers your appliance's console. It restores clear, durable button and cycle markings so you can easily read and select settings while refreshing the look of the control panel.

• Adheres to the console to display cycle and option labels
• Helps protect the keypad surface from everyday wear
• Common symptoms: peeling or bubbling film, faded/illegible text, cracks, or lifting edges
• Cosmetic/labeling part that improves readability of the controls

• Disconnect power before servicing
• Remove the old overlay and clean the console surface of residue
• Carefully align with the console/keypad openings; once pressed down, it cannot be repositioned
• Apply pressure from center outward to ensure full adhesion

This electronic control board manages the dishwasher's settings and cycle operations, restoring responsive touch controls and reliable cycle sequencing so dishes are cleaned on the selected program. Replaces a failed or unresponsive console control module. What it does:

• Interprets user inputs and runs the dishwasher's programmed cycles.
• Controls timing, wash/dry functions, and interface feedback.
• Common symptom: touchpad or display unresponsive or erratic behavior.
• Common symptom: cycles fail to start, stop mid-cycle, or show error codes tied to control faults.

• One electronic control board (W10757829).

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the board by edges to avoid ESD damage; use anti-static precautions if available.
• Some models require removing the control panel or inner door trim to access the board.

The Dishwasher Control Panel (Black) is an OEM replacement part for Whirlpool dishwashers. It serves as the primary user interface, allowing you to select wash cycles, adjust settings, and control various functions of your dishwasher.

Symptoms of a failing dishwasher control panel include:

• Unresponsive or erratic button inputs
• Malfunctioning digital displays
• The dishwasher not responding to programmed settings or commands
• Indicator lights not functioning correctly

Causes of a bad control panel can range from electrical malfunctions, physical damage from impact or moisture exposure, or simply normal wear and tear over extensive use.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.