Replaced it the one here. This was pretty easy. Moved the dryer a foot from the wall. Leaned over it and removed the two screws on the back corners (be careful not to drop them behind the dryer). Took of the knob too. Leaned the panel forward and didn't force it to come off. then took a flat head an pried the bottom left corner of the timer/frame, there is a little tab there, don't break it. Then twisted to the right and pop the old one is out. Then I pulled (hold firm with pliers and wiggle gently) and placed each of the cables on the new one. Place and twist it back in, it should give a tiny click when it is in place. Put the panel back, the screws back and the knob on... Walaaa