REPLACE DISCHARGE PUMP ASSEMBLY — self repair, requires basic mechanical ability / tools.
Unplug washer.
Pump located in the front right corner behind the lower access panel.
Remove access panel (2 screws at bottom corners of washer).
Disconnect pump electrical connectIon (located front/right side of pump)
Using pliers, remove the spring type clamp from the pump outlet —have wet vac running and collection hose directed at point where hose is removed from the pump outlet; use a large bath towel to help collect residual water not captured by vac. —approximately one gallon of water needs to be collected.
Using pliers, remove clamp and discharge hose at pump inlet.
Remove 2 pump mounting screws @ either side of pump to remove pump from washer base.
Reverse order to install new pump and reconnect discharge hoses.