First, I replaced the door gasket because it was gunked up and original on this old machine, it being the usual suspect. The result was more water! Not the result of the new gasket, however.
I looked at the website for ideas and company reps. I removed the inside door and cleaned the upper left stream vent and everything else in sight. The machine was still leaking so I stopped cleaning and kept looking. Once I removed the lower spray assembly at the bottom of the machine, I saw a small portion of the pump outlet seal outside of the pump frame. It had stretched and escaped via some loose screws. Ureka. After the installation of a new pump outlet seal and lower spray ring bearing and tightening all pump screws, I put away the dish pans and get a better machine wash that before I started.