Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel forward so it could be lifted up and off the washer cabinet. After I removed the washer's top, it was very easy except the last step of removing the switch from the top. Another video search turned up the solution described in a previous post. Using a screwdriver, tap the switch to the right and it easily falls out of the opening in the machine top. Do the reverse to install the new switch. Everything else is straight forward and easy to figure out.