Parts for Ge CS980ST1SS: 04 - Door & Drawer Parts

Flat wire shelf that slides into your oven's side supports to hold bakeware at the correct height. Replace if bent, warped, or missing a rack position.

Drawer cover panel for your range. Replaces the front-facing panel on the warming or storage drawer. Order a new one if yours is cracked, dented, or damaged.

Includes 12 washers.

This pad is a small bumper-style cushioning part that protects surfaces, reduces vibration and noise, and prevents metal-on-metal contact in appliance assemblies. It helps maintain quiet, secure operation and prevents cosmetic damage where parts meet. What it does:

• Acts as a cushion between components to absorb shock and reduce rattling or vibration.
• Prevents direct contact and wear between adjacent surfaces or panels.
• Helps keep parts aligned by providing a friction surface that resists shifting.
• Reduces noise caused by vibration or loose-fitting panels.

• One replacement pad.

• Inspect the mounting area and remove any debris or adhesive residue before installing.
• Typically presses or adhesively mounts into place; align carefully to ensure full contact.
• Replace only with the exact part number to ensure fit and function.
• Disconnect power to the appliance or follow model-specific safety precautions before accessing internal panels.

Replace your range's damaged or cracked door glass panel assembly. This outer door component restores the appearance and protects the inner door layers.

Seals the oven cavity to contain heat and improve efficiency. Replace if you notice heat escaping, uneven cooking, or visible wear. Confirm fit with your model.

Oven door glass window pack for viewing food while cooking. Replaces cracked, shattered, or broken glass. Installs inside the oven door frame assembly.

Door liner weld assembly for ranges. Structural component that forms the inner door frame. Replace if cracked, warped, or damaged from heat exposure.

Replacement slide rail for range storage drawers and compartments. Restores smooth opening and closing when original rail is worn, bent, or broken.

Secures the lower storage drawer assembly to your range cabinet. Replace this stamped metal bracket if cracked, bent, or missing to restore alignment.

Replaces a missing, damaged, or worn baking drawer rack in your range. This sliding assembly restores storage and baking space for pans and cookware.

Replacement mounting screw for electric and gas ranges. Secures internal components and panels. Needed when original screws are stripped, missing, or lost.

This replacement pan-head screw is used in refrigerators to fasten panels, brackets, and covers so they stay tight and properly aligned. Replace a missing or damaged screw to restore a solid, rattle-free fit.

• Secures interior/exterior panels, brackets, trim, and covers
• Replaces missing, stripped, or corroded hardware
• Helps maintain proper alignment of attached components

• Disconnect power before servicing; shut off water if working near water lines
• Match location to the original fastener and start threads by hand to avoid cross-threading
• Do not overtighten, especially into plastic or thin sheet metal

• Thread size: #8-18 (type AB)
• Length: 1/2 inch
• Head style: Pan head, Phillips drive

The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.

Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.

Symptoms of a bad Bumper include:

• Excessive noise
• Difficulty in sliding the drawer
• Misalignment
• Wear, and increased friction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replace your range drawer gasket to restore proper sealing and prevent heat loss. This seal maintains energy efficiency and cooking performance. Confirm fit with your range model number before ordering.

Seals the bottom edge of your range door to maintain proper temperature and reduce heat loss. Replace when worn, cracked, or loose to restore efficiency.

Stainless steel door handle for ovens and ranges. Replaces cracked, broken, or worn handles. Attaches to the front of the oven door for opening and closing.

Cushions and protects your range door or cooktop when opened or closed. Replace this bumper if it's cracked, broken, worn, or missing to reduce noise.

Structural bracket that secures and supports the range door assembly. Replace if bracket is bent, broken, or damaged causing door misalignment or instability.

Mounting screw for range installation and component assembly. Replace if stripped, rusted, missing, or damaged to ensure secure attachment of parts.

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

Mounting screw hardware for ranges and cooktops. Replace missing, stripped, or corroded screws used to secure panels, brackets, or components.

Replace your cracked or missing oven door handle endcap with this durable trim piece. Secures to the end of the bar handle for a finished look.