Parts for Kenmore 790.40299410 (79040299410, 790 40299410): Door / Drawer Parts

Replacement control panel for wall ovens. Installs on the front face to house controls and display. Order when your panel is cracked, damaged, or worn.

Trim piece for range control panel. Replaces cracked, chipped, or discolored trim around the control area. Restores a finished appearance to your range.

Replace a cracked or worn control panel that makes your oven look outdated. This front console restores your oven's appearance and button functionality.

Oven won't maintain temperature or exterior gets too hot? This insulation blanket contains heat and protects nearby components. Moderate DIY repair.

The Broiler Pan Assembly is an OEM part for Frigidaire ranges and ovens. This part includes both the broiler pan and the grill rack, designed to catch drippings and promote even cooking when broiling foods.  This assembly includes pan and insert.

Causes of a bad broiler pan assembly can include wear and tear from regular use, warping or rusting due to high temperatures, or damage from improper cleaning methods.  

Symptoms of a bad Broiler Pan Assembly include:

• Visible warping or rust on the pan or rack
• Difficulty in cleaning due to persistent stains or damage
• Uneven cooking results when broiling
• The pan or rack no longer fitting securely in the oven

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Broiler Pan Assembly is an OEM part for Frigidaire ranges and ovens. This part includes both the broiler pan and the grill rack, designed to catch drippings and promote even cooking when broiling foods.  This assembly includes pan and insert.

Causes of a bad broiler pan assembly can include wear and tear from regular use, warping or rusting due to high temperatures, or damage from improper cleaning methods.  

Symptoms of a bad Broiler Pan Assembly include:

• Visible warping or rust on the pan or rack
• Difficulty in cleaning due to persistent stains or damage
• Uneven cooking results when broiling
• The pan or rack no longer fitting securely in the oven

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This door assembly replaces a damaged or worn refrigerator door to restore proper closure and insulation, improving temperature control and appliance appearance. Fits the exact opening and hinge locations for direct replacement. What it does:

• Replaces a dented, cracked or warped door to stop air leaks and help maintain interior temperature
• Restores proper hinge alignment so the door opens and closes smoothly
• Replaces a door with damaged exterior finish or trim for improved aesthetics
• Helps the gasket seal correctly when worn or misaligned door surface causes cold loss

• One complete refrigerator door assembly

• Disconnect power and empty the door contents before starting; doors can be heavy
• Support the door when removing or installing to avoid dropping or damaging the hinge
• Reuse or replace hinge hardware and gaskets per model instructions; follow OEM alignment steps

Replacement door glass panel for electric wall ovens. Installs in the door frame to restore visibility and insulation. Order when cracked or broken.

Mounting spacer positions and supports range components for proper alignment. Replace if worn, cracked, or missing to restore correct panel fit.

Drawer assembly for ovens and ranges. Replaces broken, cracked, or damaged drawer components. Essential for restoring storage functionality.

This is a right-side metal slide rail that supports and guides the storage drawer beneath the oven compartment. It mounts inside the range frame and allows the drawer to glide smoothly in and out. Replace this part if your storage drawer is difficult to open or close, slides unevenly, or has come off its track.

Left-side rack track for wall ovens. Guides and supports oven racks for smooth sliding. Replace if bent, damaged, or causing racks to stick or tilt.

Replacement door handle for electric wall ovens. Installs on the front of the oven door. Replace if your handle is cracked, broken, or loose.

Secures and routes wiring cables inside your range or oven. Replace this retainer bracket if it's cracked, broken, or missing to properly support cables.

Metal support bracket that secures and stabilizes range components. Replaces broken, bent, or missing brackets to restore proper panel alignment.

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.