Parts for Ge JGB282EED2ES: Door Drawer Parts

Replace your worn, bent, or warped oven rack. Provides a stable surface for baking sheets and pans inside your range oven. Fits standard ovens.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Metal pan that forms your range's lower drawer assembly. Replace if bent, rusted, or damaged to restore proper alignment and smooth sliding on tracks.

Contoured washer trim secures and cushions range components, maintaining proper alignment and reducing wear. Replace if worn or damaged. Verify fit with your model.

This glass door assembly replaces a damaged or cracked oven door glass to restore heat containment and allow safe, clear viewing of the oven cavity. It fits in the oven door frame and installs as a unit to help maintain proper cooking performance. What it does

• Replaces broken, cracked or cloudy oven door glass to improve visibility and safety
• Restores proper heat retention so the oven can maintain cooking temperatures
• Helps prevent heat loss and reduces the risk of burns from exposed broken glass
• Works as the sealed glass component of the oven door assembly for normal door operation

• Handle with care — glass is fragile; wear gloves and eye protection during installation
• Follow manufacturer service manual for door removal and reassembly to avoid misalignment
• Disconnect power to the appliance before starting any repair to prevent electrical hazards

Replaces the welded inner liner on your range oven door. Restores structural support when the original is damaged, corroded, or warped. Secures insulation and door components.

Replace your oven door gasket when frayed, hardened, or heat leaks around the door. Forms an airtight seal to maintain cooking temperatures. Verify fit by model.

Cushions and secures your range or oven door handle to the door surface. Replace if cracked, worn, or missing to eliminate handle rattling and restore snug fit.

Mounting spacer that positions and secures components inside your range, maintaining proper clearances and alignment. Replace if worn, missing, or cracked.

Includes 12 screws.

Side door insulation panel for electric and gas ranges. Replaces worn, damaged, or missing insulation to restore proper heat retention and sound dampening.

Thermal insulation strip that attaches to the bottom of your range oven door. Replace if torn, compressed, missing, or no longer sealing properly.

Oven door glass window pack for viewing food while cooking. Replaces cracked, shattered, or broken glass. Installs inside the oven door frame assembly.

Insulation guard that installs on the range oven door to reduce heat transfer and dampen sound. Replace if cracked, damaged, or missing for proper thermal protection.

Replacement drawer glide for range bottom drawer. Needed when glide is broken, cracked, or snapped, causing drawer to fall, scrape floor, or not slide.

Secures the lower storage drawer assembly to your range cabinet. Replace this stamped metal bracket if cracked, bent, or missing to restore alignment.

This painted screw head is a cosmetic and protective cap that restores the finished look where a visible screw is used. It covers the screw head and helps match surrounding black trim for a clean appearance. What it does:

• Covers and conceals a screw head to improve appearance of panels, trim, or bezels
• Helps protect the screw head from direct exposure and reduces visible wear
• Used when trim or panels show exposed or mismatched screw heads
• Common fix when screw heads are scratched, discolored, or visually distracting

• Use the matching screw and press or snap the cap into place over the screw head
• Disconnect power and remove any panels only as recommended by your appliance manual before working near electrical components
• Avoid forcing or prying the cap; if tight, gently ease it on to prevent breakage
• Replace any damaged caps with the exact part to maintain fit and finish

Mounting screw for electric and gas ranges. Secures panels, brackets, or internal components. Replace if lost, stripped, or damaged during repair.

This barrier door assembly replaces the oven/stove barrier used to block heat and fumes when the appliance is not in use, helping maintain proper airflow and appliance efficiency. It's a direct-fit replacement designed to restore the door's sealing and movement. What it does:

• Covers and seals the internal opening to prevent heat, smoke and cooking odors from escaping when closed.
• Helps maintain proper internal airflow and prevents drafts when the appliance is off.
• Restores smooth opening and closing action if the original barrier door is broken, warped, or cracked.
• Can reduce heat loss and improve the performance consistency of the oven cavity.

• Disconnect power to the appliance before starting any repair.
• Handle the door carefully to avoid damaging hinges or mounting tabs during removal and installation.
• Use common hand tools; follow OEM instructions for alignment and fastening to ensure proper fit and movement.

Stainless steel oven door handle that mounts to the front of your range door. Replace if your current handle is cracked, broken, or missing for a complete look.

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

Replace a cracked, warped, or missing heat deflector shield on your range. This protective guard installs near heating elements to direct heat properly.

Black decorative trim piece that frames the oven door on your range. Replace if cracked, chipped, faded, or missing to restore a clean, finished look.

Positions and supports oven door glass to maintain proper alignment. Replace if worn, cracked, or missing to prevent glass rattling and gaps.

Mounting screw for range installation and component assembly. Replace if stripped, rusted, missing, or damaged to ensure secure attachment of parts.