Parts for Lg 14305: Door Liner Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This hinge reattaches and supports a refrigerator door, restoring proper alignment and smooth opening. It helps prevent sagging doors and uneven sealing that can affect cooling and energy use. What it does:

• Provides the pivot point that lets the appliance door open and close securely
• Restores correct door alignment to improve seal and reduce rattle
• Helps eliminate sagging, sticking, or uneven door movement
• Works as a direct replacement hinge when original is damaged or worn

• Disconnect power and empty door shelves before starting; follow OEM safety guidance
• Support the door while removing/installing the hinge to avoid dropping or damaging the door
• Use the correct fasteners and torque to secure the hinge; verify door alignment after installation

This hinge is the door pivot assembly that supports and guides a refrigerator/freezer door for smooth opening and reliable closing. Replacing a worn hinge restores proper door alignment and helps maintain an airtight seal. What it does:

• Supports the door weight and provides the pivot point for opening and closing
• Keeps the door aligned so the gasket seals correctly and the appliance cools efficiently
• Reduces door sag, rubbing, or uneven gaps that can cause drafts or cooling loss
• Stops hinge noise and binding caused by worn or damaged hinge components

• Unplug the appliance or shut off power to avoid electrical hazards before beginning
• Empty or support the door and shelves to prevent tipping or damage during removal
• Use proper tools and thread-lock or specified fastener torque where applicable

This is a replacement mounting screw designed for securing appliance panels and components where the original fastener is customized for fit. It restores proper attachment and helps reduce rattling or loose parts. What it does:

• Secures panels, brackets or components to maintain proper alignment and operation
• Replaces missing or stripped fasteners that can cause vibration or noise
• Matches the appliance's customized fastener locations for correct fit
• Helps prevent further wear or damage from loose parts when properly installed

• Disconnect power and unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Replace like-for-like; use the same screw type and length for secure fastening
• Inspect and repair damaged mounting holes or threads before reinstalling

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

This locker lock is the replacement latch mechanism that secures the appliance door during operation, restoring proper door closure and helping the unit run safely and reliably. Use when a door won't stay closed or the machine won't start. What it does:

• Replaces a worn or broken door latch to restore secure door closure
• Helps ensure the appliance detects a closed door and can start cycles
• Commonly used when the door is loose, won't latch, or causes door-sensor errors
• Fits into the door strike area and engages the cabinet catch for a firm hold

• Locker lock (single replacement latch)

• Disconnect power and water supply before servicing to avoid shock or injury
• Remove the outer door panel or access cover as needed to reach the latch area
• Verify alignment of the latch and striker when reinstalling to ensure proper engagement

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

This is a rubber gasket that seals the door vent area of the dishwasher, preventing steam and water from leaking out during the wash and dry cycles. It fits around the vent opening on the inner door panel. Replace this gasket if you notice water dripping from the door vent area, steam escaping where it shouldn't, or visible cracking and deterioration of the old seal.

The Blower Motor Casing Assembly is an OEM part for LG dishwashers. This part houses the blower motor which generates airflow through the wash arms and drying vent. The casing is precision-engineered to fit securely within the dishwasher's structure.

Causes of a bad blower motor casing assembly can include cracked or warped plastic from repeated heating and cooling cycles. The seals around the motor connection points may also deteriorate over time.

Symptoms include:

• Incomplete or overly long drying cycle times
• Water pooling in the bottom of the dishwasher after cycles
• Sloshing or excess moisture noise heard coming from inside
• Irregular or strange smells emanating from within the unit

This LG part is also compatible with some Kenmore models.

Detergent and rinse aid dispenser

Replace your dishwasher door gasket to stop leaks and restore a watertight seal. Install when water escapes during cycles. Confirm fit with your model.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.