Parts for Electrolux EI33AF80WS0: Door Parts

This replacement storage bin is a clear plastic refrigerator bin that restores usable shelf or door storage and keeps foods organized and visible. It snaps or slides into existing tracks to replace a cracked or missing bin. What it does:

• Provides a rigid, clear container for storing produce, deli items or packaged foods
• Restores lost storage capacity when an existing bin is cracked, warped or missing
• Keeps contents contained to prevent spills from spreading on shelves
• Improves visibility so you can find items quickly

• One clear plastic storage bin

• Install by aligning with the bin tracks or shelf supports and sliding or pressing into place until it clicks
• Do not force into place; inspect tracks and supports for damage before installing
• Clean with mild soap and warm water; avoid abrasive cleaners or high heat
• If uncertain about fit, compare part number on the old bin before ordering

This Door Bin is an OEM part for Frigidaire refrigerators. It serves as a convenient storage compartment for various items within the refrigerator door. Crafted specifically for Frigidaire models, this bin ensures a snug fit and easy access to frequently used items like condiments or smaller containers.

Causes of a Bad Part: If subjected to excessive weight or impact, the door bin's structural integrity can weaken over time. Frequent overloading or items slipping and striking the bin can cause cracks or breakage.

Symptoms of a Bad Part:

• Difficulty in securely holding items
• Visible cracks or breakage
• Items frequently falling out

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement divider keeps refrigerator shelves and drawers organized by separating items and preventing shifting. It restores the intended storage layout so food stays upright and easier to access. What it does:

• Separates and stabilizes items on a shelf or inside a drawer to reduce tipping and crowding
• Helps keep food organized for easier visibility and access
• Restores correct spacing when a cracked or broken divider no longer holds items apart
• Simple, passive component with no electrical parts

• One replacement divider

• Remove all items from the affected shelf or drawer before installing
• Slide or snap the divider into the existing mounting slots; it seats securely
• No wiring is involved; use light hand pressure only to avoid cracking the part
• If the original mounting clips are damaged, inspect for additional broken hardware before finalizing installation

This refrigerator shelf divider keeps items separated and organized so food stays upright and easy to access. It replaces a cracked, broken or missing divider to restore stable storage and prevent items from sliding. What it does

• Separates and stabilizes items on a refrigerator shelf or in a shelf channel.
• Helps prevent containers and bottles from tipping or shifting during door use.
• Restores proper fit and alignment where a damaged divider no longer holds items.
• Simple, low-profile part that re-establishes partitioning on the shelf.

• Remove food and any loose items from the shelf area before installing.
• Slide or snap the divider into the shelf channel; no special tools typically required.
• Handle glass shelves and edges carefully to avoid breakage or cuts.

This divider separates and organizes refrigerated cabinet shelves or bins to keep food items from shifting and to create distinct storage zones for better access and visibility. It restores the original shelf layout for orderly storage. What it does:

• Creates a physical barrier on a fridge shelf or bin to keep items organized and prevent rolling or shifting.
• Helps separate food types for easier access and reduced cross-contamination risk.
• Restores proper shelf/bin configuration after a broken or lost divider.
• Fits into existing shelf/bin tracks or slots to stay secure during normal use.

• Unplug or disconnect power to the appliance before attempting any service for safety.
• Remove contents from the affected shelf or bin and handle with care to avoid damage.
• Align the divider with the shelf/bin slots or tracks and slide into place without forcing; if it does not seat easily, verify correct orientation.

This bearing supports a rotating assembly inside the appliance to reduce friction and enable smooth rotation. Replacing a worn bearing restores quieter, more stable operation and helps prevent further wear to the shaft or drum/tub. What it does:

• Supports and stabilizes a rotating shaft or drum to reduce friction and wear
• Keeps rotation smooth to prevent wobble, vibration, and rubbing noises
• Helps maintain correct alignment of the drum/tub or rotating assembly
• Worn bearings can cause grinding, squealing, or increased vibration

• One bearing

• Disconnect power (and water, if applicable) before starting any repair
• Installation requires partial disassembly of the cabinet and rotating assembly
• Use correct tools and replacement procedures; some applications may require bearing pullers, presses, or shaft removal

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

The Door Handle Screw is an OEM part for Frigidaire refrigerators. This screw secures the door handle to the refrigerator door, ensuring a firm and stable grip for opening and closing the door.

Causes of a bad door handle screw can include regular wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or stripping. A faulty screw can lead to a loose or wobbly door handle, making it difficult to operate the refrigerator.

Symptoms of a bad door handle screw include:

• The door handle feeling loose or coming off
• Difficulty in securely tightening the handle
• Visible rust or corrosion on the screw
• Stripped threads on the screw or handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This door handle assembly provides a ready-to-install replacement to restore a secure, easy-grip opening for your refrigerator door. Durable construction replaces a worn or broken handle for reliable daily use. What it does:

• Replaces a cracked, loose, or broken refrigerator door handle to restore safe operation and appearance
• Provides a solid grip for opening and closing the door smoothly
• Matches factory mounting points for proper fit and alignment
• Helps prevent door damage and keeps the seal functioning by ensuring correct door movement

• Disconnect power to the appliance before beginning any repair to avoid injury
• Remove any trim or access panels as needed to access mounting screws; retain fasteners for reassembly
• Hand-tighten screws, then snug—do not overtighten to avoid cracking the handle or trim

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances