Parts for Electrolux FFFC22M6QWC: 02 - Door Parts

The Door Gasket is an OEM part for Frigidaire freezers. This gasket forms a seal around the door, ensuring that cold air stays inside while keeping warm air out.  

Causes of a bad gasket can include regular wear and tear from frequent opening and closing of the door, exposure to extreme temperatures, and physical damage from impacts.

Symptoms of a bad door gasket include:

• Frost buildup around the door edges
• Increased freezer temperature or inconsistent cooling
• Excessive energy consumption
• The door not sealing properly or appearing misaligned

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This small replacement clip secures trim, panels and small appliance components to keep them aligned and stable, helping prevent rattles and maintain proper fit. It's a simple, low-cost fix for loose or missing retainers. What it does

• Secures trim pieces, panels or small components in place
• Helps reduce vibration and rattling from loose parts
• Restores proper alignment of fitted panels and retainers
• Keeps covers and wiring runs routed where intended

• Disconnect power to the appliance before attempting any repairs
• Remove adjacent panels or trim as needed to access the mounting location
• Press or snap the clip into the mating slot; use pliers for leverage if required
• Replace any damaged clips with new ones to ensure a secure fit

The Freezer Door Key is an OEM replacement part for Frigidaire refrigerators. This small but essential component is designed to securely lock the freezer door, preventing accidental openings or unauthorized access.

Symptoms of needing to replace the freezer door key include:

• Difficulty in locking or unlocking the freezer door
• The key not fitting properly or becoming stuck in the lock
• Visible wear, damage, or breakage of the key itself

Causes of a faulty freezer door key can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the locking mechanism itself.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

This inner door panel replaces the oven's interior door surface to restore a clean appearance and help secure the inner glass. Fits specific Frigidaire electric ranges; restores proper door fit and finish. What it does:

• Provides the interior surface of the oven door and helps retain the inner door glass
• Stops rattling or loose inner components when the panel is cracked or damaged
• Restores a sealed fit to reduce drafts and improve door stability
• Improves the oven's cosmetic appearance when the original panel is dented or worn

• Disconnect power to the appliance before beginning any door work
• Allow the oven and door to cool completely; wear gloves to protect hands and glass edges
• Support the door and inner glass during removal to avoid dropping or chipping components

This outer door panel is the replacement exterior skin that restores your appliance's appearance and protects internal door components from damage. It fits over the door frame to give a finished, clean look and durable surface. What it does:

• Replaces a dented, scratched, or rusted door exterior to improve cosmetic appearance
• Protects internal door insulation, liners, and components from moisture and impact
• Provides the proper mounting surface for trim and door hardware
• Helps maintain an even exterior finish for proper door alignment and sealing

• One outer door panel

• Disconnect power to the appliance before starting any repair
• Some disassembly of door trim, handles, and hinges may be required to remove the old panel
• Use proper fasteners and alignment to avoid damaging the panel or door frame

The Door switch is an OEM replacement part for Frigidaire refrigerators. This part turns the light on/off as the door opens and closes.

Causes of a faulty door switch include normal wear of electrical contacts from repetitive on/off cycles. Moisture exposure may potentially corrode internal connections.

Symptoms of a bad light/switch include:

• The interior light fails to turn on when the door is opened
• The light stays on when the door is closed, leading to potential overheating
• An impact on the refrigerator’s temperature regulation due to the switch not signaling the door's closure

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator, making it easier to see and access food items.

Causes of a bad LED light bulb can include burnout from prolonged use, electrical surges, or damage from physical impact. Additionally, issues with the bulb's connection or internal circuitry can result in malfunction.

Symptoms of a bad LED light bulb include:

• The refrigerator interior remaining dark when the door is opened
• Flickering or dim light
• Intermittent lighting
• Complete failure to light up

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This light socket securely holds the appliance bulb and provides the electrical connection to illuminate the compartment when the door is opened. Replacing a faulty socket restores interior lighting so you can easily see contents.

• Provides the electrical connection and physical mounting for the light bulb
• Common failure symptoms: light won't turn on, flickers, or only works when the bulb is jiggled
• Show signs of heat discoloration, loose terminals, or intermittent contact

• Unplug the appliance before service; power is off
• Allow the bulb and surrounding area to cool before handling
• Handle wiring carefully; transfer conductors to the new socket one at a time to maintain correct connections
• Do not exceed the bulb type/wattage specified on the appliance rating label

A direct-fit replacement refrigerator door handle that restores a secure, comfortable grip and proper door operation. Matches factory fit and finish to keep the door looking and working like new. What it does:

• Provides a solid handhold for opening and closing the refrigerator door
• Replaces cracked, broken or loose handles that cause awkward or unsafe opening
• Restores factory alignment and appearance for a clean finished look
• Durable construction resists everyday wear and helps maintain reliable function

• Basic hand tools (screwdriver, socket) are typically required; your model's instructions before starting
• Align the new handle with mounting holes and tighten fasteners evenly to avoid stress
• Keep small fasteners away from children; retain any original parts in case of future reuse
• If you must access electrical components or remove panels, disconnect power first.

Quantity of 1 clip.

Note: See kit# 5303922007 and 5304406520.

This panel-mounted signal light is the small indicator lamp that illuminates when a function is active. It restores clear visual status on the control panel so you can tell at a glance when the appliance is operating. What it does:

• Lights to indicate when a feature, cycle, or function is on (model-dependent)
• Restores visible status feedback on the console or control panel
• Helps alert you if a function remains active after use
• Addresses issues such as no light, constant-on light, flickering, or a damaged lens

• 1 signal light

• Disconnect power at the breaker before servicing
• Access the control panel/console; remove knobs and screws as needed
• Note wire positions or take a photo; transfer wires to the new light
• Secure the light in the panel, reassemble, restore power, and test

This replacement screw secures appliance components so brackets, shelves, trim, or panels stay firmly in place. Install a new screw when the original is missing, stripped, or corroded to restore a tight, rattle-free fit.

• Fastens brackets, panels, trim, or covers to the cabinet or liner
• Helps maintain alignment and reduce vibration and noise
• Direct replacement for a missing, rusted, or stripped fastener
• Use wherever your model's parts diagram specifies this screw

• Disconnect power before servicing; shut off water if working near water lines
• Match thread and length to the original location as shown in your model's parts diagram
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening (especially into plastic)
• Retain and transfer any original spacers or clips used with this fastener

The Refrigerator Door Gasket Clips are OEM parts for Frigidaire refrigerators. These clips secure the door gasket in place, ensuring a tight seal to maintain the internal temperature and prevent cold air from escaping. This pack contains 40 clips, which secure the interior trim pieces and hold the gasket and liner to the freezer lid.

Over time, the gasket clips can become damaged or worn out due to frequent opening and closing of the refrigerator door, exposure to moisture, or accidental impacts. If the clips fail, the door gasket may not stay in place, compromising the refrigerator's efficiency.

Symptoms of bad refrigerator door gasket clips include:

• The door gasket not staying securely in place
• Visible damage or wear on the clips
• Cold air escaping from around the door
• Increased energy consumption due to poor sealing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.