Parts for Frigidaire CFEF3012TWA: Door Parts

This door trim kit replaces the decorative trim on a refrigerator door to restore a finished look and cover worn or damaged edges. It improves appearance and helps maintain a clean door edge. What it does:

• Replaces worn, cracked, or chipped decorative trim on the refrigerator door
• Covers exposed edges and mounting gaps for a finished appearance
• Restores consistent styling after repair or part replacement
• Helps prevent dirt buildup along the door edge by providing a sealed trim surface

• High-level, drop-in style replacement — no special tools typically required
• Turn off power and empty door area for safe, unobstructed access before starting
• Handle trim carefully to avoid scratching finished surfaces during installation
• Keep original screws/clips and replace any that are missing or damaged

This shelf glass is a flat replacement shelf that restores usable storage space and a clean, stable surface inside the refrigerator. It fits into existing shelf rails to support food containers and help keep the interior organized. What it does

• Replaces a cracked, chipped or missing refrigerator shelf glass to restore safe, level storage
• Provides a smooth, easy-to-clean surface for storing dishes, produce and containers
• Helps contain spills and keeps items from falling through wire shelving gaps
• Matches OEM fit so it sits properly on the shelf supports and slides into existing tracks

• One shelf glass panel

• Handle with care; wear cut-resistant gloves to avoid injury from broken glass
• Remove any debris or broken pieces before installing the new glass
• Lift into place on existing shelf supports or rails; do not force or flex the glass
• If any shelf hardware is damaged, replace hardware before installing the glass

The Inner Door Glass is an  OEM replacement part for Frigidaire ranges. It is responsible for providing a safe viewing window into the oven cavity while protecting interior components from external damage.  

Causes of a bad inner door glass include normal wear and tear such as chips or cracks developing from years of use. Accidental impact or thermal shocks from sudden temperature changes can also compromise the integrity of the glass.

Symptoms of a bad inner door glass:

• Cracks or breaks visible in the glass
• Difficulty seeing into the oven cavity clearly 
• Increased risk of heat escaping when the oven is in use
• Potential safety hazards if glass cracks or shatters  

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.

This inner cabinet liner replaces a damaged or worn refrigerator interior surface to restore a clean, sealed cavity and help maintain proper cooling and food protection. Fits the refrigerator fresh-food/freezer compartment where the molded liner is required. What it does:

• Replaces cracked, warped or heavily stained interior cabinet surfaces that can trap dirt or moisture
• Provides a smooth, sealed surface for shelves, drawers and door gaskets to seat properly
• Helps prevent airflow leaks and localized condensation by restoring proper inner cabinet shape
• Common symptom: visible cracks, chips, bubbling, persistent odors or water pooling inside the compartment

• One inner cabinet liner as shown

• Recommended for installers or experienced DIYers; remove power and empty cabinet before starting
• Use appropriate fasteners and sealants specified by manufacturer; avoid over-tightening to prevent cracking
• Inspect surrounding components (shelves, clips, door gaskets) and replace damaged items for best performance
• Follow OEM service manual steps for removal/installation to ensure proper fit and alignment

The Screw is an OEM part for Frigidaire ovens. This screw secures the oven door handle to the door, ensuring it remains firmly attached and stable during use.

Causes of a bad screw can include wear and tear over time, corrosion from exposure to heat and moisture, or damage from over-tightening or stripping.  

Symptoms of a bad screw include:

• The oven door handle feeling loose or wobbly
• The handle detaching from the door
• Difficulty in securing the handle properly
• Visible damage or rust on the screw

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Oven Door Seal is an OEM part for Frigidaire wall ovens and ranges. Located around the outer perimeter of the oven door, this silicone seal forms a tight insulation barrier when closed. Maintaining appropriate interior temperatures relies on an intact door seal.

Causes of a bad oven door seal can include cracking, crumbling or compression from repeated use over many years. Food debris or residue left on the seal surface may also degrade sealing ability.

Symptoms of a bad oven door seal include:

• Difficulty closing or sealing the oven door tightly
• Visible gaps around the door allowing heat escape
• Higher energy bills from the oven running excessively
• Uneven or unreliable cooking temperatures

This OEM Frigidaire oven door seal is also compatible with some Electrolux, Gibson, Kelvinator and Kenmore wall oven models.

This mounting spacer keeps the correct gap between cabinet components to prevent rubbing and reduce vibration, helping panels and doors sit squarely. Small but critical for quiet, trouble-free operation. What it does:

• Maintains proper clearance between panels, brackets, or assemblies to prevent contact and wear.
• Dampens vibration and helps reduce rattling or buzzing noises from loose or shifted parts.
• Restores panel or door alignment when a missing or damaged spacer causes gaps or binding.
• Helps protect fasteners and nearby components from friction damage.

• Disconnect power (and water, if applicable) before accessing internal panels or assemblies.
• Handle panels carefully to avoid scratching; use gloves and proper tools.
• Verify orientation and location against the service diagram; replace any additional worn spacers for best results.

This replacement door hinge restores smooth, secure opening and closing for compatible Frigidaire refrigerators. It supports proper door alignment to help maintain an airtight seal and even cooling. What it does

• Secures the refrigerator door to the cabinet and provides a pivot point for opening and closing.
• Helps maintain correct door alignment to prevent gaps that can cause temperature loss.
• Reduces door sag and uneven wear that can lead to noisy or stiff operation.
• Addresses symptoms like a sagging or misaligned door, a door that won't close properly, or rough/noisy movement.

• Disconnect power to the appliance before beginning any service.
• Support the door while removing or installing the hinge to prevent injury or damage.
• Keep all mounting hardware; replace any stripped or damaged screws before reassembly.
• Check hinge mounting points and door gaskets for wear.

The Door Handle is an OEM part for Frigidaire ovens. This handle is designed to provide a secure grip for opening and closing the oven door. It is essential for safely accessing the oven's interior, ensuring convenience and ease of use while cooking or cleaning.

Common causes of a bad handle include wear and tear from frequent use, impact damage from accidental bumps or falls, or exposure to high temperatures over time that can weaken the material.

Symptoms of a bad door handle include:

• The handle feeling loose or wobbly
• Visible cracks or breaks in the handle
• Difficulty in opening or closing the oven door
• The handle detaching from the door completely

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement surface burner cap sits on top of the gas burner head to focus and distribute the flame for even, efficient heating. Replacing a damaged or missing cap can restore proper ignition and flame pattern. What it does:

• Covers and protects the burner head from spills and debris
• Spreads and concentrates the flame for consistent cooking performance
• Helps prevent yellow, lifting, or uneven flames when properly seated
• Common symptoms: uneven or yellow flames, poor simmer, delayed ignition, chipped/warped/missing cap

• 1 surface burner cap

• Allow the cooktop to cool; disconnect power and shut off gas if servicing beyond simple cap replacement
• Lift off the old cap and clean the burner head surface of residue or debris
• Center the new cap on the matching burner head so it sits level—do not force
• Use the correct cap for the burner position; test ignition and flame after installation

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

Replacement screw that secures panels, trim and internal components in compatible appliances. Restores proper fit and helps reduce rattling or loose parts when the original fastener is missing, worn, or damaged. What it does:

• Fastens panels, brackets, trim pieces and small component assemblies to the appliance frame
• Helps eliminate noise and vibration caused by loose or missing fasteners
• Replaces stripped, corroded or missing screws to restore secure mounting
• Matches OEM fit when the identical screw is required for proper alignment

• Disconnect power to the appliance before starting any repair
• Use the correct driver size to avoid cam-out or damage to the screw head
• Do not overtighten; overtightening can strip threads or crack plastic parts

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.