Parts for Frigidaire FFEF3052TSB: Door Parts

The Outer Door Glass is an OEM part for Frigidaire ranges. It forms the transparent viewing window on the front exterior of the oven door.

The outer glass allows homeowners to efficiently monitor food items while baking or roasting. Its multi-pane design works to insulate retained heat within the oven cavity, maintaining set temperatures for optimal cooking results.

Over time, causes like impacts or abrasions from cleaning can damage the outer door glass surface or compromise its seal.

Symptoms of a failing outer door glass include:

• Visible cracks or scratches reducing visibility inside the oven
• Air gaps forming between the glass panes allowing heat to escape
• Fogging or condensation building up between panes

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Inner Door Glass is an  OEM replacement part for Frigidaire ranges. It is responsible for providing a safe viewing window into the oven cavity while protecting interior components from external damage.  

Causes of a bad inner door glass include normal wear and tear such as chips or cracks developing from years of use. Accidental impact or thermal shocks from sudden temperature changes can also compromise the integrity of the glass.

Symptoms of a bad inner door glass:

• Cracks or breaks visible in the glass
• Difficulty seeing into the oven cavity clearly 
• Increased risk of heat escaping when the oven is in use
• Potential safety hazards if glass cracks or shatters  

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.

This inner cabinet liner replaces a damaged or worn refrigerator interior surface to restore a clean, sealed cavity and help maintain proper cooling and food protection. Fits the refrigerator fresh-food/freezer compartment where the molded liner is required. What it does:

• Replaces cracked, warped or heavily stained interior cabinet surfaces that can trap dirt or moisture
• Provides a smooth, sealed surface for shelves, drawers and door gaskets to seat properly
• Helps prevent airflow leaks and localized condensation by restoring proper inner cabinet shape
• Common symptom: visible cracks, chips, bubbling, persistent odors or water pooling inside the compartment

• One inner cabinet liner as shown

• Recommended for installers or experienced DIYers; remove power and empty cabinet before starting
• Use appropriate fasteners and sealants specified by manufacturer; avoid over-tightening to prevent cracking
• Inspect surrounding components (shelves, clips, door gaskets) and replace damaged items for best performance
• Follow OEM service manual steps for removal/installation to ensure proper fit and alignment

This is a wafer-head screw with a square (Robertson) drive used to secure appliance trim and handle components. It replaces worn or missing fasteners so panels and handles stay firmly attached. What it does

• Secures appliance trim, handles, and lightweight panels where a low-profile wafer head is required
• Square-drive head resists cam-out for reliable tightening
• Common replacement for loose, stripped, or missing fasteners
• Small size fits confined fastening locations without protruding

• One wafer-head square-drive screw (10-24 x 1.6)

• Use the correct square (Robertson) bit to avoid damaging the head
• Tighten securely but avoid over-torquing to prevent thread or component damage
• Disconnect power or follow manufacturer safety guidelines before working near electrical components
• If screw threads are damaged, replace with new threaded insert or correct-size fastener

The Oven Door Seal is an OEM part for Frigidaire wall ovens and ranges. Located around the outer perimeter of the oven door, this silicone seal forms a tight insulation barrier when closed. Maintaining appropriate interior temperatures relies on an intact door seal.

Causes of a bad oven door seal can include cracking, crumbling or compression from repeated use over many years. Food debris or residue left on the seal surface may also degrade sealing ability.

Symptoms of a bad oven door seal include:

• Difficulty closing or sealing the oven door tightly
• Visible gaps around the door allowing heat escape
• Higher energy bills from the oven running excessively
• Uneven or unreliable cooking temperatures

This OEM Frigidaire oven door seal is also compatible with some Electrolux, Gibson, Kelvinator and Kenmore wall oven models.

The Inner Door Glass is an  OEM replacement part for Frigidaire ranges. It is responsible for providing a safe viewing window into the oven cavity while protecting interior components from external damage.  

Causes of a bad inner door glass include normal wear and tear such as chips or cracks developing from years of use. Accidental impact or thermal shocks from sudden temperature changes can also compromise the integrity of the glass.

Symptoms of a bad inner door glass:

• Cracks or breaks visible in the glass
• Difficulty seeing into the oven cavity clearly 
• Increased risk of heat escaping when the oven is in use
• Potential safety hazards if glass cracks or shatters  

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.

This mounting spacer keeps the correct gap between cabinet components to prevent rubbing and reduce vibration, helping panels and doors sit squarely. Small but critical for quiet, trouble-free operation. What it does:

• Maintains proper clearance between panels, brackets, or assemblies to prevent contact and wear.
• Dampens vibration and helps reduce rattling or buzzing noises from loose or shifted parts.
• Restores panel or door alignment when a missing or damaged spacer causes gaps or binding.
• Helps protect fasteners and nearby components from friction damage.

• Disconnect power (and water, if applicable) before accessing internal panels or assemblies.
• Handle panels carefully to avoid scratching; use gloves and proper tools.
• Verify orientation and location against the service diagram; replace any additional worn spacers for best results.

This replacement door hinge restores smooth, secure opening and closing for compatible Frigidaire refrigerators. It supports proper door alignment to help maintain an airtight seal and even cooling. What it does

• Secures the refrigerator door to the cabinet and provides a pivot point for opening and closing.
• Helps maintain correct door alignment to prevent gaps that can cause temperature loss.
• Reduces door sag and uneven wear that can lead to noisy or stiff operation.
• Addresses symptoms like a sagging or misaligned door, a door that won't close properly, or rough/noisy movement.

• Disconnect power to the appliance before beginning any service.
• Support the door while removing or installing the hinge to prevent injury or damage.
• Keep all mounting hardware; replace any stripped or damaged screws before reassembly.
• Check hinge mounting points and door gaskets for wear.

This stainless 30-inch door handle restores a secure, comfortable grip and a clean, factory look to the door. Use it when the original handle is loose, cracked, missing, or cosmetically damaged.

• Replaces a damaged, wobbly, or missing door handle to restore normal opening and closing
• Addresses symptoms like a loose or rattling handle, flexing under pull, or visible wear
• Stainless finish matches the original appearance on compatible units
• Sized to the manufacturer's 30-inch configuration for proper fit

• Disconnect power and allow hot surfaces to cool before servicing
• Support the door; on some models, removing the door provides better access to handle screws
• Transfer any trim/end caps and reuse existing mounting screws per your model's instructions
• Tighten screws evenly; do not overtighten to avoid damaging the door skin or glass

This burner cap sits on top of the sealed burner head on a gas cooktop/range to evenly distribute flame and protect the burner from spills. Replacing a damaged or missing cap helps restore proper flame pattern and efficient cooking performance.

• Covers the burner head to shape the flame and shield it from debris
• Helps ensure even heating across cookware
• Common signs it may need replacement: uneven or yellow flames, sputtering or noisy burner, cookware scorching on one side, cap chipped, warped, or missing
• Color/finish: black

• Shut off gas supply and allow the cooktop to cool completely before servicing
• Lift off the old cap; clean the burner head surface
• Center the new cap on the burner head—ensure it seats flat and stable
• Test the burner for a steady, even blue flame after reassembly

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

Replacement screw that secures panels, trim and internal components in compatible appliances. Restores proper fit and helps reduce rattling or loose parts when the original fastener is missing, worn, or damaged. What it does:

• Fastens panels, brackets, trim pieces and small component assemblies to the appliance frame
• Helps eliminate noise and vibration caused by loose or missing fasteners
• Replaces stripped, corroded or missing screws to restore secure mounting
• Matches OEM fit when the identical screw is required for proper alignment

• Disconnect power to the appliance before starting any repair
• Use the correct driver size to avoid cam-out or damage to the screw head
• Do not overtighten; overtightening can strip threads or crack plastic parts