Parts for Frigidaire FFEW2726TSA: Door Parts

This high-temperature insulation is used in the oven assembly to contain heat and protect nearby components and cabinetry. Replacing damaged insulation helps the appliance maintain set temperatures and keeps exterior surfaces from getting excessively hot. What it does:

• Helps retain heat for stable baking and roasting temperatures
• Reduces heat transfer to the appliance frame and adjacent cabinets
• Replaces insulation that is torn, charred, or saturated with spills/grease

• One insulation piece

• Disconnect power; for gas models, also shut off the gas supply
• Remove the range or wall oven and access the oven body
• Wear gloves, eye protection, long sleeves, and a dust mask; fibers can irritate skin and lungs
• Reinstall in the same orientation/routing as the original; do not compress insulation or block vents

This is a replacement glass panel for the appliance assembly. It restores a clear, intact barrier where the original glass was cracked, chipped, or missing—helping the unit operate safely and look like new. What it does:

• Replaces broken or shattered glass to restore the intended barrier or support surface
• Helps maintain safe operation by eliminating sharp edges and gaps
• Preserves proper appearance and fit of the assembly
• Typical symptoms: visible cracks, spider-web shatter, loose or rattling panel, missing glass

• One glass panel

• Disconnect power and allow all surfaces to cool before service; wear cut-resistant gloves and eye protection
• Support the assembly during disassembly to prevent drops or stress on hinges/frames
• Transfer any trim, brackets, gaskets, or insulation from the original panel as required
• Handle glass carefully by the edges; do not overtighten fasteners against glass

This inner cabinet liner replaces a worn, cracked, or damaged refrigerator cabinet surface to restore a clean, sealed interior and prevent moisture damage. It provides the structural surface that supports shelves and seals the cooling cavity. What it does:

• Restores the refrigerator's interior surface when the original liner is cracked, warped, or stained
• Helps maintain proper airflow and preserves the cabinet seal around shelves and gaskets
• Prevents food and liquid from contacting the cabinet cavity behind the liner
• Reduces drafts and cold spots caused by damaged interior surfaces

• Designed to be installed by an experienced DIYer; follow the refrigerator's service manual
• Requires removal of shelves, trim, and door(s) for access; keep hardware organized for reassembly
• Inspect and replace any damaged fasteners, insulation, or seal components as needed for a complete repair
• Disconnect power and empty the unit before beginning work to prevent injury or damage

This replacement 10-24 x 3/8 machine screw secures panels, brackets, and small components in compatible Frigidaire appliances. It restores proper fastening where a missing or damaged screw allows parts to shift or rattle. What it does:

• Fastens metal or plastic appliance parts such as trim, brackets, or small assemblies
• Helps eliminate movement, rattling, or loose connections caused by missing or stripped screws
• Restores safe, secure mounting for controls and hardware
• Matches OEM size for proper fit in designated threaded holes

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or nut driver to avoid stripping the head
• Start threads by hand to ensure alignment; tighten until snug — do not over-tighten
• Replace any stripped mating hardware or use correct thread engagement for secure fit

This outer refrigerator door assembly replaces a damaged, dented, or warped door to restore proper sealing, insulation, and the appliance's finished appearance. It provides a clean mounting surface for handles, hinges, and interior trim. What it does

• Replaces the outer door panel and associated mounting points to restore a snug fit and proper door alignment
• Helps maintain the cabinet seal that supports efficient cooling and temperature stability
• Restores the appliance's exterior appearance and provides attachment for handles and hinge hardware
• Addresses symptoms like visible damage, bent door, or trouble getting the door to close evenly

• One outer door assembly

• Disconnect power and remove all food from the door area before starting
• Door assemblies are heavy and awkward—two people and basic hand tools are often required
• Retain and transfer any model-specific trim, insulation, or door shelves per OEM instructions
• Inspect hinges and fasteners for wear and replace if needed to ensure proper alignment

The Hinge is an OEM component specially designed for Frigidaire wall ovens. Responsible for securely mounting the heavy oven door during continuous opening/closing cycles, it ensures safe, reliable use.

Constant load stress from opening doors causes typical wear degrading precision fit reducing function over years of use. Oven access suffers from misaligned closures.

Symptoms indicating hinge issues involve:  

• Difficulty fully opening or stabilizing door position
• Noisy or off-center door alignment disturbing recipes  
• Sagging or loose door fit risking accidental closing 

Causes relate to normal metal component fatigue from sustained weight bearing multiplied by every use cycle. Impacts damage lubrication preventing smooth pivoting.

Replacing with this OEM Frigidaire hinge restores a secure, balanced opening for convenient recipe checks. Compatibility also fits some Kenmore, Gibson, and Electrolux wall ovens renewing a well-supported entrance for safety and long-lasting enjoyment. 

This support bracket secures and stabilizes appliance components, restoring proper alignment and stopping movement. It's a simple replacement that helps reduce rattling and prevents panels or assemblies from shifting during use. What it does:

• Provides a rigid mounting point to hold panels, trim, or internal assemblies in place
• Restores proper alignment when a worn or broken bracket causes gaps or looseness
• Reduces vibration and rattling caused by a damaged or missing support
• Keeps connected parts from shifting, which can prevent further wear or damage

• Disconnect power to the appliance before beginning any repair
• Verify the bracket orientation and fit against the mating surface before fastening
• Use the factory screw locations and hardware; tighten screws securely but avoid over-torquing

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

This spacer sets the correct gap between mating parts in your appliance's assembly, preventing rubbing and misalignment. Replace a missing or worn spacer to restore a solid fit, reduce noise, and protect surrounding components.

• Maintains proper spacing between components for correct alignment and operation
• Reduces metal-to-metal contact, squeaks, and premature wear
• Helps fasteners and panels seat securely
• Typical symptoms when failed: loose or rattling parts, uneven gaps, or visible wear marks

• Disconnect power; for gas models, shut off the gas. Allow the appliance to cool completely.
• Access the assembly per your model's diagram; note the original orientation/stack-up before removal.
• Reuse original fasteners if serviceable; hand-start threads and tighten snugly to avoid damaging the spacer.
• Verify alignment and clearances before fully reassembling. Quantity and location vary by model.

Replacement screw that secures panels, trim and internal components in compatible appliances. Restores proper fit and helps reduce rattling or loose parts when the original fastener is missing, worn, or damaged. What it does:

• Fastens panels, brackets, trim pieces and small component assemblies to the appliance frame
• Helps eliminate noise and vibration caused by loose or missing fasteners
• Replaces stripped, corroded or missing screws to restore secure mounting
• Matches OEM fit when the identical screw is required for proper alignment

• Disconnect power to the appliance before starting any repair
• Use the correct driver size to avoid cam-out or damage to the screw head
• Do not overtighten; overtightening can strip threads or crack plastic parts