Parts for Kenmore 253.9768080 (2539768080, 253 9768080): Door Parts

The Refrigerator Door Gasket is an OEM part for Frigidaire refrigerators. It provides a tight seal around the refrigerator door, ensuring that cold air stays inside and warm air stays out, maintaining optimal temperatures for food preservation. The gasket measures approximately 29-1/2" wide x 44" long. 

Causes of a bad door gasket can include wear and tear over time, damage from frequent opening and closing of the door, or improper cleaning that leads to cracks or tears. A compromised gasket can lead to energy inefficiency and affect the refrigerator's performance.

Symptoms of a bad door gasket include:

• Noticeable gaps between the door and the refrigerator
• Increased energy consumption
• Frost buildup around the door seal
• Difficulty in closing the refrigerator door properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Shelf Bar is an OEM part for Frigidaire refrigerators. It is designed to secure items on the refrigerator door, providing additional storage space and helping to keep items organized and easily accessible. The sturdy construction ensures that it can hold bottles, jars, and other items securely. It measures approximately 31 inches in length. 

You should replace the door shelf bar if it becomes damaged or worn out. Common causes include regular use, accidental impacts, or the weight of heavy items over time, which can cause the bar to crack or break.

Symptoms of a bad door shelf bar include:

• Items falling from the door shelf
• Visible cracks or breaks in the bar
• Difficulty keeping items securely in place
• The bar not fitting properly or staying attached

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Shelf Support is an OEM part for Frigidaire refrigerators, designed to hold and support the shelves on the inside of the refrigerator door. This part ensures that door shelves are securely mounted, providing stable storage for bottles, condiments, and other items.  

Symptoms of a failing Door Shelf Support include:

• Shelves becoming loose or sagging
• Difficulty in keeping items securely on the door shelves
• Cracks or breaks in the support

Causes of a bad Door Shelf Support can range from normal wear and tear, to accidental damage, such as overloading the door shelves with too much weight or impact from moving items in and out. Over time, the stress of weight and use can lead to the supports becoming damaged. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Door Shelf Support is an OEM part for Frigidaire refrigerators. It serves as a critical component in the refrigerator's door, providing support for the shelves that hold various items like bottles, jars, and other containers. This support measures approximately 2 1/2" tall x 1 1/2" deep. 

Causes of a bad door shelf support can include cracking due to overloading, material fatigue from regular use, or accidental damage. When the supports weaken or break, it affects the structural integrity of the door storage, leading to potential spills or damaged goods.

Symptoms of a bad Door Shelf Support include:

• Shelves leaning or sagging noticeably
• Difficulty in fitting the shelf into the door
• Cracks visible in the support
• Shelves falling off or failing to hold items securely

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement freezer door panel restores the exterior finish and thermal barrier to your freezer door, helping maintain cabinet insulation and a clean, uniform appearance. Fits select Frigidaire freezers and installs in place of a damaged or worn panel. What it does:

• Replaces a dented, cracked, or cosmetically damaged freezer door exterior
• Restores the insulated barrier to help reduce cold loss and interior frost buildup
• Provides a factory-style finish to match other appliance panels
• Works with existing door hardware and trim when reinstalled correctly

• Remove power and empty the door area before starting; follow all safety precautions.
• May require removing the door, trim, and handle to access mounting fasteners.
• Reuse original screws and brackets when possible; verify alignment and seal after installation.

The Screw is an OEM replacement part for Frigidaire refrigerators. This small but essential component is used to secure various parts of the appliance, such as panels, brackets, or internal fixtures, ensuring the refrigerator's structural integrity and proper operation.

Over time, screws may become loose, stripped, or corroded due to regular use, environmental factors, or maintenance work. A damaged or missing screw can lead to misaligned parts or reduced stability of the appliance.

Symptoms of a bad or missing screw include:

• Loose or wobbly components within the refrigerator
• Panels or fixtures coming apart or misaligned
• Difficulty securing parts during maintenance or repair
• Rattling or unusual noises during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement screw secures appliance components so brackets, shelves, trim, or panels stay firmly in place. Install a new screw when the original is missing, stripped, or corroded to restore a tight, rattle-free fit.

• Fastens brackets, panels, trim, or covers to the cabinet or liner
• Helps maintain alignment and reduce vibration and noise
• Direct replacement for a missing, rusted, or stripped fastener
• Use wherever your model's parts diagram specifies this screw

• Disconnect power before servicing; shut off water if working near water lines
• Match thread and length to the original location as shown in your model's parts diagram
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening (especially into plastic)
• Retain and transfer any original spacers or clips used with this fastener

The Handle Mounting Block is an OEM part for Frigidaire refrigerators. This component anchors the refrigerator door handle assembly while also reinforcing the door structure.

Causes of a bad mounting block can include cracks developing from repeated opening/closing stresses, broken fasteners loosening its installation, or residual damage during door replacement or repair attempts.

Symptoms of a bad handle mounting block include:

• Loose, sagging or misaligned door handles
• Doors difficult to open or not staying securely closed/latched
• Noisy rattling coming from the door handle area
• Cracks or breaks visible in the mounting plastic

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Specs: 10-16 X 0.500

Size: Approximate 2.5 inches thick, 33 inches wide and 70 inches long.