Parts for Maytag MER8680BS0: 04 - Door Parts

This outer oven door glass replaces cracked or damaged exterior glass so you can safely view the oven cavity and restore the door's appearance. Fits Whirlpool-built ranges and restores the door's protective outer surface. What it does:

• Replaces broken, cracked, or severely scratched outer door glass
• Restores a clear view into the oven cavity for monitoring food
• Helps maintain the oven door's finished appearance
• Prevents loose glass from creating a safety hazard

• Disconnect power to the appliance before beginning any repair
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Removal may require taking the oven door off and removing retaining screws/panels

This door hinge secures and guides the active refrigerator door so it opens and closes smoothly while maintaining proper alignment. Durable replacement hinge restores correct door movement and helps prevent sagging or misalignment. What it does:

• Provides the pivot point and structural support for the active refrigerator door
• Keeps the door aligned for a proper seal and even gaps
• Commonly replaces hinges that cause door sagging, rubbing, or difficulty closing
• Works with the door assembly hardware to maintain smooth operation

• Disconnect power to the appliance and remove food/items from the door before starting.
• Support the door while removing and installing the hinge to prevent injury or damage.
• Reuse original mounting screws; tighten securely but avoid overtightening.
• After installation, check door alignment and adjust as needed for a proper seal.

This factory fastener secures appliance panels, brackets, and internal components. Replacing a missing, stripped, or corroded screw restores proper fit and stability, helping reduce vibration, rattling, and wear during everyday operation.

• Secures covers, brackets, and assemblies to the cabinet or frame
• Restores alignment to reduce gaps, looseness, and vibration
• Replaces lost, damaged, corroded, or stripped hardware
• Matches the original fastener for correct fit and retention

• Disconnect power and shut off water or gas before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Tighten snugly—do not overtighten to prevent thread or plastic damage
• Inspect receiving threads or clips; repair/replace if stripped or broken

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

This inner door glass is the heat-resistant panel mounted on the inside of the oven door. It restores a clear, secure barrier to help retain heat and visibility when the original glass is cracked, shattered, or stained.

• Forms the inner pane of the oven door to contain heat and allow viewing of food
• Damage can cause heat loss, longer preheat/cook times, and unsafe sharp edges
• Cracked, shattered, or missing glass should be replaced before using the appliance
• Cloudy or permanently stained glass reduces visibility into the oven

• Disconnect power at the breaker and allow the oven to cool completely
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Support or remove the door and work face-down on a padded surface
• Transfer any brackets/clips/insulation as configured; do not overtighten fasteners against the glass

This support bracket secures internal components to the appliance chassis, restoring proper alignment and stability for attached parts. It's a simple replacement that helps stop rattling and prevents components from shifting during use. What it does:

• Provides a secure mounting point to hold panels, assemblies or components in place
• Helps eliminate vibration or rattling caused by a loose or broken bracket
• Restores proper alignment so connected parts operate correctly
• Prevents further wear or damage from loose components

• Disconnect power to the appliance before starting any repair
• Basic hand tools (screwdriver, nut driver) are typically required
• Keep original fasteners and note their location for reassembly; replace damaged hardware as needed

This factory fastener secures appliance panels, brackets, or internal components. Replacing a missing, rusted, or stripped screw restores a tight fit, reduces vibration/noise, and helps keep parts properly aligned for reliable operation.

• Fastens components to the appliance cabinet or frame
• Replaces missing, corroded, or damaged fasteners
• Helps correct loose, rattling, or misaligned panels and trim
• Supports stable, rattle-free performance when originals are worn or stripped

• Disconnect power; shut off gas or water before servicing
• Match to the original location; start threads by hand to avoid cross-threading
• Use the correct driver that fits the screw head to prevent stripping
• Snug firmly but do not overtighten; repair damaged threads if needed

This inner oven door liner replaces the damaged or warped inner panel that supports the oven door glass and helps contain heat inside the oven cavity. It restores a solid mounting surface for door glass and internal components. What it does:

• Provides the inner structural panel for the oven door and supports the door glass and insulation.
• Helps maintain proper oven heat containment to support uniform cooking.
• Prevents direct exposure of insulation and internal parts to oven cavity heat and food debris.
• Addresses symptoms like visible cracks, warping, or detached glass mounting points on the inside of the door.

• Disconnect power before starting any repair and follow manufacturer's safety instructions.
• Remove the oven door per the appliance manual to access and replace the inner liner; handle glass and sharp edges carefully.
• Keep all original screws and mounting clips; confirm screw locations during disassembly to ensure proper reassembly.
• If the door has multiple glass panels or seals, verify placement during reassembly—do not force parts into position.

This mounting bracket secures internal or external appliance components to the cabinet, restoring proper alignment and preventing vibration. It's a small but critical metal support used where fasteners attach panels or assemblies. What it does:

• Provides a secure attachment point for panels, controls, or assemblies
• Prevents loosening, rattling, and misalignment caused by broken or missing supports
• Restores proper fit and function when original bracket is bent, cracked, or missing
• Works as a direct replacement using existing fasteners and mounting holes

• Disconnect power (and gas if applicable) before beginning any repair
• Installation typically requires basic hand tools (screwdriver, nut driver, or socket)
• Retain or reuse original screws; verify bracket orientation before tightening
• If metal edges are sharp, use care and protective gloves to avoid cuts

This outer door panel replaces a damaged or dented refrigerator door surface to restore appearance and protect internal components. It fits the corresponding factory door assembly and provides a like-new exterior finish. What it does:

• Replaces a bent, dented, scratched, or rusted outer door surface
• Restores the refrigerator's exterior appearance and helps protect internal door parts
• Addresses cosmetic damage that can lead to moisture intrusion or continued corrosion if left unrepaired
• Works with the existing inner liner, insulation, and hardware when installed correctly

• Disconnect power to the appliance (unplug or shut off breaker) before starting any repair
• Remove door trim, handles, and existing fasteners to detach the old panel; save or reuse compatible hardware
• Handle panels carefully to avoid new dents or scratches during installation; align edges before securing fasteners

Color: Stainless

This is a replacement door handle for select Whirlpool-built appliances. It restores a secure, comfortable grip and fresh appearance on the appliance door, helping ensure smooth opening and closing.

• Provides a sturdy handhold for opening and closing the door
• Replaces worn, loose, or broken handles
• Can help resolve issues like loose grip, rattling handle, or difficulty opening the door
• Color/finish: Monochromatic stainless look

• Unplug the appliance or disconnect power before servicing
• Open the door and support the handle to prevent drops or scratches
• Transfer and reuse existing screws/end caps if applicable; do not overtighten
• Verify alignment and handle orientation per your model's service literature

This Door Handle restores a solid, secure grip for opening and closing your microwave door. Replace a cracked or loose handle to bring back smooth door operation and dependable access to the cavity. What it does:

• Provides the external grip used to open and close the microwave door
• Transfers pulling force to the door's latch-release mechanism
• Helps ensure smooth, controlled door operation
• Replace if the handle is cracked, broken, loose, or missing

• 1 door handle

• Disconnect power to the microwave before servicing
• Protect the door glass and finish; support the door while working
• Access the handle screws from the inner door trim; secure the new handle without overtightening
• Verify the door opens, closes, and latches properly before restoring power

The Door Gasket is an OEM part for Whirlpool ovens. This part creates a tight seal around the oven door, preventing heat from escaping during cooking. This part ensures that the oven maintains a consistent temperature, leading to more efficient cooking and energy use. 

A damaged gasket might also allow hot air to escape, potentially causing heat damage to surrounding kitchen cabinetry and increasing energy consumption.

Symptoms of a bad Door Gasket include:

• The oven takes longer to preheat
• You notice heat escaping from the edges of the oven door
• Uneven cooking or baking results
• Increased energy bills due to the oven working harder to maintain temperatures

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.