Parts for Whirlpool WFE710H0AE0: 05 - Door Parts

Black vent trim for electric and gas ranges. Replaces cracked, broken, or discolored trim pieces. Installs with screws for a clean finished look.

The Vent Trim is an OEM part for Whirlpool ranges. This is a decorative and protective cover that surrounds the vent or exhaust opening, enhancing the overall aesthetic appearance while also preventing accidental access to the vent area.

Causes of a bad Vent Trim include physical damage from impact or mishandling, exposure to excessive heat or moisture, and general wear and tear over time, leading to discoloration, warping, or deterioration of the trim material.

Symptoms of a bad part include:

• Visible cracks, dents, or deformities in the trim
• Discoloration or fading of the trim's finish
• Loose or improperly fitting trim, allowing potential access to the vent area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Grey

Replacement door handle for electric and gas ranges. Installs on the oven door exterior. Order this part if your existing handle is cracked, broken, or missing.

Color: Grey

Color: Grey

Replaces the cracked, warped, or damaged inner oven door panel. Supports door glass and contains heat. Essential for restoring door structure.

This factory fastener secures appliance panels, brackets, and internal components. Replacing a missing, stripped, or corroded screw restores proper fit and stability, helping reduce vibration, rattling, and wear during everyday operation.

• Secures covers, brackets, and assemblies to the cabinet or frame
• Restores alignment to reduce gaps, looseness, and vibration
• Replaces lost, damaged, corroded, or stripped hardware
• Matches the original fastener for correct fit and retention

• Disconnect power and shut off water or gas before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Tighten snugly—do not overtighten to prevent thread or plastic damage
• Inspect receiving threads or clips; repair/replace if stripped or broken

Inner oven door glass panel installs inside the door frame to retain heat and provide visibility. Replace when cracked, shattered, or stained.

Supports your range oven door for smooth opening and closing. Replace if your hinge is cracked, bent, or worn, causing the door to sag or misalign.

Replaces the exterior oven door glass panel to restore clear viewing and finished appearance. Needed when the outer glass is cracked, broken, or damaged.

Replaces cracked, shattered, or chipped outer glass panel on your range oven door. Restores appearance and protects inner door components.

Restores the finished look of your range door edge. Covers the gap between door panel and console. Replace if cracked, broken, or missing for a clean look.

Front-facing decorative bezel that restores finish and edge protection to your range door. Replace when worn, cracked, or damaged. Verify fit with model.

Size: 8-18 x 1/2 inch.

Bracket that secures and supports the glass cooktop or oven door glass panel. Replace if cracked, bent, or broken to restore proper glass alignment.

Fix a loose or misaligned glass cooktop with this support bracket. Secures the glass surface in proper position for safe cooking. Simple installation.

The Screw is an OEM part for Whirlpool ranges. This screw is used to secure various components within the range, ensuring that parts such as panels, control boards, or burners are firmly attached and remain stable during operation.  

Causes of a bad range screw can include regular wear and tear, over-tightening, or exposure to high heat.  

Symptoms of a bad range screw include:

• Loose or unstable components within the range
• Difficulty in securing parts during maintenance or repair
• Visible damage or wear on the screw
• Parts becoming misaligned or rattling during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replacement screw secures door handles, panels, and brackets on your range or oven. Install when original screws are stripped, missing, or damaged during repairs.

This Door Glass is the OEM replacement glass panel for the appliance door, restoring a clean appearance and protecting interior components. It replaces damaged, cracked, or scratched door glass so the door looks and functions like new. What it does:

• Replaces broken, cracked, or chipped door glass to restore safety and appearance
• Provides a protective barrier for internal components and insulation
• Helps maintain proper visibility through the door
• Restores a finished exterior surface for easy cleaning

• Disconnect power to the appliance before beginning any repairs
• Handle glass carefully and wear cut-resistant gloves and eye protection
• May require partial or full door disassembly—keep track of fasteners and hardware

This spacer maintains the designed clearance between parts in your appliance, keeping components aligned for smooth, quiet operation. Replacing a worn or missing spacer helps prevent rubbing, binding, and premature wear in the affected assembly.

• Maintains the correct gap and alignment within the assembly
• Reduces friction, noise, and wear between adjacent parts
• Helps components seat and move smoothly as designed
• Typical symptoms include scraping noises, looseness or wobble, misalignment, or visible spacer damage

• Disconnect power (and water supply, if applicable) before servicing
• Refer to your model's parts diagram to determine the spacer's location, orientation, and stack order
• Reuse existing hardware (washers, clips, screws) as required by your model
• Tighten fasteners snugly without deforming the spacer; verify smooth movement before full reassembly

Positions and secures your range door handle, maintaining proper spacing from the door surface. Replace if cracked, broken, or missing to restore fit.

Secures and finishes the end of your range oven door handle. Replace if cracked, broken, or missing to keep the handle firmly attached to the door.

Secures internal components to the chassis, restoring alignment and stability. Replace if broken, cracked, or missing to stop rattling and shifting.

Secures internal components to the cabinet, restoring proper alignment. Replace this metal support bracket if cracked, broken, or missing from your range.