Parts for Whirlpool WRT108FFDB01: Door Parts

Shoulder bolt screw that secures refrigerator door handles. Replace if missing, stripped, or loose to restore proper handle attachment and alignment.

Black door handle for top-mount refrigerators. Replaces cracked, broken, or worn handles on fresh food or freezer compartment doors. Direct fit.

White plastic door handle for top-mount refrigerators. Replaces cracked, broken, or worn handles. Installs on refrigerator or freezer door compartment.

External door handle for top-mount refrigerators. Replaces broken, cracked, or missing handles. Mounts to the outer door for smooth opening and closing.

Refrigerator door gasket creates an airtight seal to prevent cold air loss and reduce frost buildup. Replace if torn, cracked, or no longer sealing properly. Verify fit with your model number before ordering.

Rubber door gasket seals refrigerator door perimeter to maintain interior temperature and humidity. Replace if door won't seal, condensation forms, or higher energy bills occur. Verify fit with your model number.

Replace your refrigerator door gasket to restore the airtight seal, improve energy efficiency, and keep food fresh. Snaps into place for easy installation.

Decorative trim that finishes the edge of your refrigerator door and covers fasteners. Replace if cracked, broken, or missing to restore a clean look.

Color: Grey

Replacement door shelf rail for refrigerator door shelves. Secures items and prevents them from falling out. Needed when rail is bent, broken, or missing.

Replaces damaged or worn 18-inch stainless exterior door panel on top-mount refrigerators. Restores appearance when original panel is dented or scratched.

Black plastic hole plug cover for top-mount refrigerators. Replaces cracked, broken, or missing plugs that cover unused mounting holes in cabinet walls.

Seals openings in refrigerator doors to prevent air leaks and moisture intrusion. Replace if cracked, missing, or causing temperature issues.

Grey plastic hole plug cap for refrigerators. Covers unused mounting holes in cabinet interior or shelving. Replace if original is cracked, missing, or broken.

Protective thimble bushing that reinforces the hinge pin mounting hole in your freezer door liner. Replace if worn, cracked, or missing to stabilize hardware.

Creates an airtight seal on your freezer door to prevent cold air loss and frost buildup. Replace if torn, cracked, or no longer sealing properly.

Refrigerator door gasket creates an airtight seal to maintain temperature and efficiency. Replace if cracked, torn, or loses compression. Confirm fit.

The Door Gasket is an OEM part for Whirlpool refrigerators. This gasket provides a seal between the freezer door and the main cabinet, ensuring a tight closure and preventing cold air from escaping. It is made of high-quality materials that provide a reliable barrier against temperature fluctuations and help maintain cooling efficiency.

A bad freezer door gasket can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as frost buildup inside the freezer, decreased cooling performance, or a loose-fitting freezer door, it may be time to replace the  the worn-out or damaged freezer door gasket with this genuine OEM part.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• Decreased cooling performance
• A loose-fitting freezer door

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Replacement mounting screw for refrigerator panels, brackets, and trim. Restores secure fit when original screw is stripped, missing, or damaged.

The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.

Symptoms of a bad Bracket-Door Stop include:

• The door overextending when opened
• Difficulty in maintaining the door's position
• Visible bending, cracking, or damage to the bracket

Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures panels, brackets, and other components in your appliance so they stay tight and properly aligned. Use it to replace missing, stripped, or rusted hardware and eliminate looseness, rattles, or gaps.

• Fastens parts to the cabinet/frame to maintain structural integrity
• Helps keep panels and assemblies aligned to reduce vibration and noise
• Replaces missing, damaged, or corroded screws during service
• Common fix for loose panels or components that no longer hold securely

• Disconnect power and shut off water or gas before servicing
• Match length and thread to the original screw for proper fit
• Hand-start threads to avoid cross-threading; tighten only until snug—do not overtighten
• Tighten them evenly to ensure proper alignment

Gray button plug for refrigerators. Covers screw holes and mounting points for a finished look. Replace if cracked, broken, or missing. Easy snap-in install.

Black button plug for refrigerators. Covers and conceals holes or openings in cabinet panels. Replace if cracked, broken, missing, or discolored.

Secures and finishes the ends of refrigerator door shelves. Replace if cracked, broken, or missing to prevent items from falling off shelf edges.

The Compartment Door is an OEM part for Whirlpool refrigerators. It is designed to cover and protect specific compartments within the refrigerator, such as the dairy or deli section, helping to maintain the ideal temperature and humidity levels for stored items. It measures approximately 9 inches by 6 inches.

You should replace the compartment door if it becomes damaged or worn out. Causes of a bad compartment door can include cracks or breaks from frequent use, hinge damage, or warping due to temperature fluctuations.

Symptoms of a bad compartment door include:

• The door not closing properly
• Visible cracks or breaks
• Difficulty in opening or closing the compartment
• Reduced freshness of stored items due to improper sealing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Adjustable flip-up shelf for refrigerator door storage. Installs on door with clip fasteners. Replace if cracked, broken, or clips are damaged.

The Door Trim is an OEM part for Whirlpool refrigerators. It acts as a trim and edging along refrigerator shelves located on the door. The shelf trim allows items placed on shelves to be properly contained and prevent accidental falls.

Causes of a bad shelf trim include cracks, chips or peeling of the trim material from years of use and stresses from items placed on shelves.

Symptoms of a bad shelf trim include:

• Gaps appearing around shelf edges allowing smaller items to fall through
• Loose or uneven fit of trim that distorts the shelf structure
• Visible fasteners or unfinished shelf edges

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door trim is an OEM replacement part for Whirlpool refrigerators. It provides a sturdy support for storing items on the door, providing convenient access to frequently used condiments, beverages, and other essentials. This door shelf bar ensures that your items are securely held in place, preventing them from falling or shifting during opening and closing of the refrigerator door.  

A bad door trim can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as cracks, sagging, or difficulty in securely holding items, it may be time to replace the door shelf bar.

Symptoms of a bad door trim include:

• Cracks or damage on the bar
• Sagging or instability when holding items
• Difficulty in securely placing or removing items from the shelf

Repair your refrigerator by replacing the faulty or damaged door trim with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Decorative trim that surrounds the main refrigerator door for a finished appearance. Replace if cracked, chipped, fractured, or broken along the edges.

Secures internal components to the refrigerator chassis. Replace if your bracket is bent, cracked, or missing to restore stable support and alignment.

Snap bushing installs in door panel openings to protect wiring or tubing. Replace if cracked, missing, or worn to prevent chafing and pinching.

A decorative plastic piece that covers the end of refrigerator door handles where they attach to the door surface. Replace if the cover is cracked, discolored, missing, or loose, which can expose mounting screws and create an unfinished appearance.

White plastic endcap for refrigerator door handles. Snaps into place at handle ends. Replaces missing, cracked, or broken endcaps on top-mount models.

Color: Black

Color: White

Door reversal kit for refrigerators. Includes hardware to switch door swing direction. Replace if original kit is missing, damaged, or incomplete.