Parts for Ge PFSE5NJYCDWW: 01 - Doors Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Forms an airtight seal around your refrigerator door to maintain stable temperatures and prevent frost buildup. Replace when worn, torn, or no longer sealing properly.

OEM mounting screw secures interior panels, trim, and brackets in your refrigerator. Replace lost, stripped, or worn fasteners to restore fit.

Freezer door cam closure for right-hand side installation. Replace if cam is cracked, broken, or missing to restore proper door alignment and closure.

This cam closure is the left-side closing cam that secures and aligns the freezer door, helping the door latch properly and maintain an even seal to keep the compartment cold. A direct-fit replacement that restores proper door action. What it does:

• Guides and locks the freezer door into the correct closed position
• Helps maintain an even door seal to reduce cold air loss and frost buildup
• Prevents door sagging or misalignment that can keep the door from latching
• Works with the door hinge/latch mechanism to ensure smooth opening and closing

• Disconnect power to the appliance before starting any repair
• Installation may require removing the freezer door or inner door panel; keep fasteners organized
• Handle plastic components carefully to avoid cracking; align cam to hinge before tightening

Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.

Replacement door connector plate for your refrigerator. Installs between door sections to secure alignment. Replace if cracked, broken, or missing.

Replacement door connector plate for your refrigerator. Mounts between door sections or panels. Order a new plate if yours is cracked or broken.

1/4-10 x 3/4 inch hex washer head screw secures panels, brackets, and components in your refrigerator. Replace when missing, stripped, or broken.

Lower freezer basket for refrigerators. Organizes frozen items in the bottom freezer compartment. Replace if cracked, broken, or missing.

Replace your refrigerator door gasket to restore the airtight seal and prevent cold air loss. Install when gasket is cracked or loose. Confirm fit.

White refrigerator door handle assembly. Replaces broken, cracked, or worn handles. Mounts to the front of your refrigerator door for opening access.

Stainless steel fastener secures your refrigerator door handle to the door assembly. Replace worn, loose, or missing hardware for solid grip and alignment.

Plastic retaining clip that secures drawer divider modules in place. Replaces broken, cracked, or missing snuggers to restore proper fit and separation.

Door hinge thimble for refrigerator freezer doors. Installs on door hinge pivot points. Replace if cracked, worn, or missing to restore proper alignment.

Clear flip-up cover for the door-mounted dairy compartment. Replaces cracked, broken, or missing dairy doors to restore a clean look and keep items secure.

Refrigerator dairy door compartment that mounts on the right door to store butter, cheese, and small items. Replace if cracked, broken, or missing.

Wire beverage rack installs on refrigerator door to organize cans and bottles. Replace if broken, bent, or missing to restore door storage space.

A replacement module shelf assembly that supports and secures a refrigerator's electronic control module and wiring inside the cabinet, helping maintain proper component position and reduce vibration-related connection issues. What it does:

• Provides a stable mounting surface for the main control module and related wiring harness
• Keeps the module correctly positioned to prevent loose connections or intermittent electrical symptoms
• Helps reduce vibration and rattling that can occur when the original shelf is cracked or broken
• Maintains proper spacing to avoid contact with other components that might cause wear or shorting

• One module shelf assembly

• Disconnect power to the appliance before beginning any service
• Handle the shelf and electrical connectors gently to avoid damaging clips or wiring
• Installation typically requires basic hand tools and removing interior panels for access
• Module and harness are fully seated and secured before restoring power

Lever lock secures your refrigerator door handle assembly. Replaces broken or missing locks that allow handle to loosen or detach from door.

The door shelf bin is a removable storage compartment that attaches to the inside of your refrigerator door, providing easy-access space for condiments, beverages, and small food items. It clips into molded tracks on the door liner and can typically be repositioned at different heights. Replace this part if the bin is cracked, broken, or no longer stays locked in position on the door.

Secures brackets, panels, and components inside your refrigerator. Replace stripped, rusted, or missing hardware to restore tight alignment and stability.

This is a dispenser trim piece that includes the integrated control board (PCB) assembly. It mounts on the front of the refrigerator door and houses the electronics that operate the water and ice dispenser. Replace this assembly if the dispenser buttons are unresponsive, the display is malfunctioning, or the trim is cracked or damaged.

Replacement door wedge for your refrigerator. Secures and aligns the door properly. Order a new wedge if yours is cracked, broken, or missing.

The Dispenser Shield is an OEM part for GE refrigerators equipped with water and ice dispensers. This shield acts as a protective cover for the dispenser area, preventing accidental spills or debris from entering the internal mechanisms.

Symptoms of a faulty dispenser shield:

• Difficulty in accessing or operating the dispenser
• Water or ice leaks around the dispenser area
• The shield becoming loose, cracked, or dislodged from its mounting
• Visible damage or wear on the shield surface

Causes of a bad dispenser shield can include impact or mishandling, exposure to excessive moisture or freezing temperatures, or general wear over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models. 

Door bumper for French door refrigerators. Cushions and stops door travel. Replace if cracked, missing, or worn to prevent door damage.

Handle lock bracket for refrigerator doors. Secures handle locking mechanism in place. Replace if bracket is cracked, broken, or missing for proper fit.

Replacement sleeve bracket for your refrigerator. Secures internal components in place. Order a new bracket if yours is cracked, broken, or missing.