Parts for Electrolux E30MC75PPSB: 05 - Doors Parts

This spacer provides a precise mounting gap to hold panels or components in the correct position, helping maintain alignment and reduce stress. It's a simple replacement for worn or missing spacers. What it does:

• Creates and maintains the correct gap between panels or components for proper fit
• Stabilizes mounting points to reduce vibration and rattle
• Helps ensure doors and panels align and operate smoothly
• Prevents metal-on-metal contact that can cause wear or noise

• One spacer

• Disconnect power to the appliance before starting any work
• Access may require removing exterior panels or trim; keep fasteners organized
• Reinstall spacer in the exact original location; hand-start screws to avoid cross-threading

Replacement glass panel that restores a smooth, easy-to-clean surface and clear visibility inside the appliance. Use this glass to replace cracked, chipped, or scratched panels and help maintain safe, sanitary storage and display. What it does:

• Replaces damaged or worn glass to restore visibility and a finished interior surface
• Provides a smooth, stain-resistant surface that's simple to wipe clean
• Fits into factory glass supports to restore proper seating and stability
• Helps prevent food from contacting rough or broken edges that can trap debris

• Handle with care; wear cut-resistant gloves and eye protection when removing/installing glass
• Remove food and shelving from the area before beginning; power off the appliance if work requires reaching electrical components
• Align the glass into the factory tracks or supports—do not force or flex the glass

The Inner Door Glass Kit is an OEM part for Frigidaire wall ovens. It consists of transparent panes that allow viewing baked goods without opening the door.

Causes of a bad inner door glass kit can include cracks or chips from impacts or intense oven heat cycling over time. 

Symptoms of a bad inner door glass kit include:  

• Foggy or discolored glass obstructing visibility inside
• Not securely mounted panes rattling in the door frame
• Cracks, chips, or large scratches compromising the glass barrier

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This hinge secures and guides a refrigerator door so it opens and closes smoothly and holds proper alignment. Replacing a worn hinge restores stable door operation and helps the gasket seal correctly. What it does:

• Provides a pivot point for the refrigerator door to open and close
• Keeps the door aligned so it seals properly and maintains interior temperature
• Replaces worn, bent, or damaged hinge hardware that can cause door sag or uneven gaps
• Reduces rubbing, binding, or noisy movement during door operation

• One hinge

• Unplug the appliance or disconnect power before starting work
• Support the door while removing or installing the hinge to prevent injury or damage
• Use the same mounting screws and positions; tighten hardware securely but avoid over-torquing
• Check door alignment and gasket sealing after installation; adjust hinge as needed per your model's service instructions

This component is the inner panel for a microwave oven door. This part includes the heat-resistant interior part of the microwave door. If this part sustains damage in any way, it may be less effective and will need to be replaced. This could include breaks, cracks, or dents. The glass could break and this part includes the inside door panel that contains the glass. The person performing the repair should wear gloves to protect their hands during this process. Unplug the microwave first.The microwave oven door inner panel is compatible with microwave ovens that are manufactured by Kenmore Elite, Frigidaire, and Electrolux. It is sold as an individual part. This particular part is sourced straight from the manufacturer itself.

This replacement frame restores the appliance's front cabinet trim for a finished look and secure component fit. It helps protect internal parts and keeps the control area or door edges properly aligned. What it does:

• Replaces damaged, cracked, or warped front trim that affects appearance or fit
• Secures adjacent panels and provides a mounting surface for controls or seals
• Helps stop drafts or gaps that can form around doors or control openings
• Restores proper alignment to reduce rubbing or interference with moving parts

• One replacement frame as pictured

• Disconnect power (unplug or switch off breaker) before starting any repair
• Basic hand tools (screwdriver, nut driver) are typically required; keep fasteners for reuse if intact
• Handle edges carefully to avoid scratching the finish; protect surrounding surfaces during installation

This right-side latch head is part of the door latching assembly. Replacing a worn or broken latch head restores positive door engagement so the appliance recognizes a closed door and operates safely and reliably.

• Engages the door strike to keep the door closed and actuate safety/interlock switches
• Helps address "door open" messages, won't start conditions, or doors that pop open
• Replaces cracked, worn, or missing right-side latch head that causes loose latching
• Side-specific component; left and right are not interchangeable

• Disconnect power before servicing; be aware high-voltage capacitors can retain a dangerous charge
• Remove the door/inner trim as needed to access the latch mechanism
• Note spring/linkage orientation and transfer to the new latch head
• After reassembly, verify smooth door closure and proper operation before restoring power

This left-side door latch head is the hook assembly on the microwave door that engages the interlock switches. Replacing a worn latch restores a secure close and reliable start/stop so the unit operates only with the door fully shut. What it does:

• Hooks into the cabinet to keep the door closed and aligned
• Actuates the door interlock switches for safe operation
• Helps prevent doors from popping open or needing pressure to run

• Includes 1 left-side latch head

• Disconnect power at the breaker before servicing
• Remove the inner door trim to access the latch; support the door and protect the glass
• Compare orientation and transfer any reusable hardware from the original part
• After reassembly, verify the door closes smoothly and the microwave only starts with the door fully closed

This is a replacement mounting screw used to secure panels, trim, and small components in compatible appliances. Installing the correct screw restores a secure fit and helps stop rattling or loose parts. What it does:

• Secures panels, brackets, trim pieces or small assemblies to the appliance frame
• Prevents parts from shifting, vibrating, or producing rattling noises when in place
• Replaces missing, worn, or stripped fasteners that cause loose doors or misaligned trim
• Works with the original mounting points and thread types used by the manufacturer

• Always disconnect power or unplug the appliance before servicing to avoid electrical hazard.
• Use the correct screwdriver or bit to avoid stripping the head; do not overtighten.
• Keep track of small parts and compare the new screw to the old one before installation.