Parts for Frigidaire FFTR1835VB2: Doors Parts

This replacement name plate is the identification label used on the appliance's exterior to restore a clear, readable ID and finish. It helps keep the appliance looking complete and makes model/serial information visible. What it does:

• Replaces a worn, faded, or missing identification label on the appliance exterior
• Restores the appliance's original appearance and readable markings
• Helps owners locate model/serial details when present on the label
• Prevents confusion caused by missing or damaged name plate graphics

• High-level replacement; clean and dry the mounting surface before installing for best adhesion
• Remove any old adhesive or backing carefully to avoid surface damage
• Align the label precisely, then press firmly to secure
• Disconnect power and follow basic safety precautions when removing exterior panels if required

This stainless steel freezer door kit replaces a damaged or dented freezer door to restore your freezer's appearance and help maintain a proper seal. Designed as a direct-fit replacement for compatible models. What it does:

• Replaces a scratched, dented or corroded freezer door surface
• Restores proper door alignment and helps maintain interior temperature
• Improves appliance appearance with a stainless steel finish
• Stops drafts and reduces moisture buildup caused by damaged doors

• Disconnect power to the appliance before beginning any repairs
• Installation may require removing the hinge pins and lifting the old door off; two people can help handle the door safely
• Handle and hinge hardware may need transfer from the old door
• Follow model-specific instructions and use proper tools to avoid damage

The Fresh Food Door Gasket (Gray) is an OEM replacement part for Frigidaire refrigerators. As a critical component, this gasket forms an insulating seal around the refrigerator's fresh food door opening. It helps maintain interior temperatures and energy efficiency. 

Causes of a bad gasket can include cracks or splits developing from repeated opening and closing of the door. General wear through daily use may also cause seal degradation over time. 

Symptoms of a bad door gasket include: 

• Higher than normal energy bills   
• Excess frost or moisture buildup inside  
• Difficulty closing the refrigerator door fully
• Inability to reach optimal cooling levels

This OEM Frigidaire replacement is compatible with some Electrolux, Kelvinator, and Kenmore refrigerators as well.

This gasket creates a tight seal between mating surfaces inside your appliance to prevent air or water leakage. Replacing a worn seal restores proper containment, helping the unit maintain performance, temperature control, and efficiency.

• Seals the joint between components to keep air and moisture from escaping or entering
• Helps the unit maintain stable temperatures and proper operation
• Replace if cracked, deformed, brittle, or no longer sealing
• Common symptoms: visible damage, leaks, condensation, or reduced performance due to poor sealing

• Disconnect power; shut off water supply if your repair involves any water connections
• Note the orientation of the original gasket before removal
• Clean and dry all mating surfaces; remove old adhesive or residue as needed
• After installation, run a quick test and check for leaks or gaps around the seal

This replacement gasket restores a tight, flexible seal where your appliance needs it—helping contain air, moisture, or heat so performance stays consistent and leaks are minimized. Use it to replace a worn or damaged seal and improve efficiency.

• Forms a compressible seal between two mating surfaces
• Helps prevent air or water from escaping, supporting correct temperature and moisture control
• Replace if the old gasket is torn, cracked, hardened, misshapen, or won't stay seated
• Common symptoms include visible gaps, poor closure/fit, moisture at the edge, or temperature inconsistencies near the opening

• Disconnect power; turn off water supply if applicable
• Remove the old gasket and thoroughly clean the channel/mating surfaces before installing
• For door-style seals, warming the gasket (warm water or low heat) can help it relax; set corners first and seat evenly
• After installation, check for leaks or air gaps during a test run

This outer refrigerator door replaces a damaged or dented cabinet door to restore appearance and proper sealing. It provides the structural panel that mounts hinges, handles and the door gasket for normal operation and cooling performance. What it does:

• Replaces a damaged or dented outer refrigerator door panel
• Restores correct hinge alignment and door closing pressure
• Helps maintain proper internal temperature by supporting the gasket seal
• Prevents drafts, moisture intrusion and cosmetic blemishes

• Disconnect power and remove any food from door shelves before starting
• Door panels are heavy and may require two people to position and install
• Support the cabinet and follow OEM hinge/fastener order to avoid damage
• Check gasket condition and hinge fasteners after installation; adjust for proper seal

This replacement door kit restores a damaged or worn appliance door so it closes securely and looks like new. It's an exact-fit repair part designed to return proper door function and help prevent leaks, drafts, or heat loss. What it does

• Replaces a cracked, dented, or otherwise damaged door to restore appearance and operation
• Restores proper door closing and sealing to reduce leaks, drafts, or temperature loss
• Corrects alignment issues caused by bent or worn door components
• Stops rattling or movement caused by broken or missing door parts
• Helps ensure latches and hinges engage as intended for safe use

• One door kit

• Disconnect power and/or gas and follow the appliance manufacturer's safety instructions before beginning
• Use basic hand tools; support the door during removal to avoid dropping or damage
• Inspect surrounding seals, hinges, and latch for wear and replace if needed for best results

This door shelf bin restores usable storage on the inner door. Replace a cracked, broken, or missing bin to keep items organized and help prevent spills when opening and closing the door.

• Attaches to the door liner to hold food items and containers
• Replace if the original is cracked, warped, or has broken mounting tabs
• Common symptoms: bin falls off or won't stay seated, reduced door storage, items tipping or sliding
• Restores proper fit and organization on the door

• Empty the bin and support the door while working
• Remove the old bin by lifting up and out; align the new bin with the door rails and press down until fully seated
• Do not force; ensure you're installing in the correct door position for this bin
• No electrical work required; handle plastic parts carefully to avoid cracking

This replacement refrigerator bin restores safe, organized storage space inside your appliance. It securely holds bottles, jars, and small items so they don't tip, spill, or get lost—helping you maximize capacity and keep contents easy to reach. What it does:

• Provides contained storage for food and beverages in the designated compartment
• Attaches to molded supports/rails for stable, removable organization
• Replaces cracked or broken bins to restore usable space
• Common symptoms: stress cracks, broken tabs, bin won't stay seated, items falling or spilling

• 1 bin

• Remove contents, then lift the old bin up and out from its supports
• Align the new bin on the supports; slide or press down until fully seated
• Do not force or overload; verify placement and orientation per your model
• Minimize door-open time to maintain temperature; no electrical work required

This replacement door bin restores secure, organized storage on your refrigerator door, keeping bottles and condiments in place and easy to reach. It's a direct swap for a damaged or missing bin to keep items from tipping or falling.

• Mounts on the inner door as a shelf-style bin to hold jars, bottles, and small items
• Helps organize contents and maximize usable door space
• Replace if cracked, chipped, or the retaining tabs are broken
• Common symptoms: bin falls off, won't stay seated, or the original is missing

• Empty the old bin and lift straight up to release from the door tabs/rails
• Align the new bin with the slots/rails and press down until fully seated
• Do not force cold plastic; let it warm to room temperature to reduce cracking risk
• Avoid overloading the bin after installation

This precision bearing supports a rotating component inside your appliance, reducing friction for smooth, reliable operation. Replacing a worn bearing can eliminate noise and restore proper movement in the affected assembly.

• Provides low-friction support for a rotating shaft or component
• Helps maintain alignment for smooth, quiet operation
• Common symptoms include squealing/grinding noises, wobble/play, or binding/seized rotation
• Excess drag can cause overheating or motor overload

• Disconnect power and shut off gas/water supplies as applicable before service
• Match orientation to the original and your model's diagram for placement
• Clean the shaft/bore and inspect mating parts; replace worn components; apply OEM-approved lubricant only if specified
• If press-fit is required, use proper drivers/press tools; do not hammer directly on the bearing

This bearing supports a rotating shaft within the appliance assembly, reducing friction for smooth, quiet operation. Replace a worn bearing to address grinding noise, wobble, or binding and to protect related components.

• Provides low-friction support for a rotating shaft or hub inside the assembly
• Helps maintain alignment for smooth, consistent rotation
• Reduces noise and wear from metal-on-metal contact
• Common failure signs: grinding/squealing, rough rotation, excess play/wobble, or intermittent binding

• Disconnect power; shut off water or gas before servicing
• Note orientation and any spacers/clips during disassembly to ensure correct reassembly
• Clean the shaft and housing; inspect mating parts and replace if worn or damaged
• Seat the bearing squarely using gentle, even pressure to avoid deforming the housing or shaft

This bearing supports and allows smooth rotation of the dryer drum, helping reduce noise and wear. Replacing a worn bearing restores stable drum movement and helps prevent scraping, thumping, or drag during cycles.

• Supports the rear of the drum for proper alignment and smooth rotation
• Can help address squeaking, grinding, scraping, or thumping sounds
• Reduce drum wobble, drag, or intermittent stopping during operation
• Wear item that can degrade over time with heat and load stress

• Disconnect power before service and allow components to cool
• Access typically requires removing the top and front panels
• Inspect the drum shaft, support bracket, and glides for wear; replace if needed
• Apply manufacturer-approved high-temp lubricant where specified

This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and controls enclosed for safer operation and a clean look. What it does:

• Protects internal components and wiring from dust, debris, and accidental contact
• Restores the exterior appearance where the original cover was damaged or missing
• Helps maintain proper airflow and clearance around covered components
• Reduces risk of accidental contact with moving or electrical parts

• Basic hand tools typically required; disconnect power before starting
• Handle carefully to avoid scratching painted surfaces
• Inspect mounting tabs or fasteners and replace any damaged hardware as needed
• Follow for removal and reassembly procedures

This auto-closer hook mounts at the door hinge and engages the closer/cam to help pull the door shut for a reliable seal. Replace a worn or broken hook to restore smooth, consistent self-closing action. What it does

• Couples the door to the hinge's auto-closer/cam mechanism
• Helps the door finish closing and stay closed
• Reduces bounce-back so the gasket can seal properly
• Common symptoms: door won't self-close, pops back open, feels loose at the lower hinge, or the original hook is cracked/worn

• 1 auto-closer hook

• Disconnect power before servicing; support the door and use a helper if removing it from the hinge
• Access the lower hinge/closer area; remove the damaged hook and transfer any spacers or screws
• Install the new hook in the same orientation; tighten hardware securely
• Recheck door alignment and inspect the mating cam/closer if issues persist

The Refrigerator Hook-Auto Closer is an OEM part for Frigidaire French door refrigerators. Located on the top inside edges of the refrigerator doors, the hook-auto closer attaches the closing mechanism arms to allow automatic opening and closing functions. 

Symptoms of a bad hook-auto closer include: 

• Doors detached from closing mechanism  
• Linkages slipping out of place 
• Loose or unstable door movement
• Grinding noises when doors open or close

Causes of a bad hook-auto closer can be damage or deformation from excessive impact, broken weld points, or normal wear over time.

This genuine Frigidaire part is compatible with some Electrolux and Kenmore French door refrigerator models as well.

The Hook is an OEM part for Frigidaire refrigerators. It helps to ensure a secure and proper closure of the refrigerator door.

A bad door closer hook can be caused by wear and tear, damage, or misalignment. Signs of a faulty door closer hook include the door not closing fully or not staying closed, difficulty in opening or closing the door smoothly, or a loose or wobbly door.

Symptoms of a bad door closer hook can include:

• The refrigerator door not sealing properly
• Excessive force required to open or close the door
• Visible damage or misalignment of the door closer hook

Replace your worn or damaged door closer hook with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic