Parts for Frigidaire FFTR1835VB2: Shelves Parts

The Freezer Glass Shelf is an OEM part for Frigidaire side-by-side refrigerators. Crafted from durable tempered glass with raised edges, the shelf provides an organized storage surface for frozen items. 

Causes of a bad freezer glass shelf include cracking or chipping of the glass surface from falls or impacts over time. The plastic edge trim could also show wear and loose or brittle areas.

Symptoms of a bad freezer glass shelf include:

• Glass surface with cracks or chips that compromise integrity  
• Shelves that tip or become unstable while loaded
• Warped or deformed plastic trim no longer fitting properly
• Missing or damaged supporting brackets

This genuine Frigidaire shelf is compatible with some Electrolux and KitchenAid bottom freezer models.

This is the door latch carriage for a microwave. It holds and guides the door hooks so the latch engages the interlock switches correctly, allowing the unit to start only when the door is fully closed.

• Guides the door latch/hooks to engage the interlock switches
• Can help resolve issues like the microwave not starting, running only when pressure is applied to the door, or door error messages
• Address a loose, sticky, or misaligned door latch mechanism
• Replacing a broken carriage can restore proper door closure feel

• Unplug the microwave before servicing; high-voltage components can retain a charge
• Remove the control panel or inner door trim as directed in your service manual to access the latch area
• Transfer any springs or latch pieces in the same orientation
• Test door function and interlock engagement before reassembly

This half-width deli drawer fits the fresh food compartment and restores proper fit and smooth sliding when the original is cracked or missing. It keeps meats, cheeses, and snacks organized and helps contain small spills.

• Holds and organizes deli items in the refrigerator's fresh food section
• Slides on existing rails beneath the shelf frame to store items and contain drips
• Replace if the original bin is cracked, warped, discolored, falls off the rails, or won't slide smoothly
• Restores original storage capacity and proper drawer alignment

• Remove contents and pull the old drawer straight out past the stops
• Align the new drawer with both rails and slide in until fully seated
• Allow plastic to warm to room temperature before installation; handle gently to avoid stress cracks
• Reinstall any existing lid/cover and ensure shelf frame and rails are undamaged and properly seated

The Crisper Drawer is an OEM part for Frigidaire refrigerators. It provides humidity-controlled storage for fruits and vegetables in the refrigerator compartment. The crisper drawer sits on a set of smooth-gliding rollers for easy access.

Causes of a bad crisper drawer can include cracked or broken plastic, rollers that no longer function properly, or issues with the sealing gasket.

Symptoms of a bad crisper drawer include:

• Difficulty opening and closing the drawer
• Excess moisture or drying out of stored items
• Warping or discoloration of the plastic structure
• Inability to regulate humidity inside the drawer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement light socket secures the refrigerator/freezer lamp and provides the electrical connection needed for the interior light to operate. It restores a reliable bulb connection so the interior light turns on when the door opens. What it does:

• Holds and connects the interior lamp/bulb to the appliance wiring
• Replaces a cracked, corroded, or loose socket that causes intermittent or no light
• Helps eliminate flickering, a loose bulb, or a socket that won't accept a bulb
• Works with compatible appliance wiring and standard appliance light bulbs

• One light socket

• Disconnect power to the appliance before servicing to avoid shock
• Remove the old socket and unplug or disconnect wires, then attach the replacement per OEM wiring orientation
• Inspect bulb and wiring; replace the bulb if damaged and secure wiring connectors

The Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding and connecting the light bulb in the refrigerator, allowing for proper lighting inside the appliance.

A bad light socket can be caused by electrical issues, physical damage, or wear and tear over time. Signs of a faulty light socket include a non-functional light bulb, flickering or dim lighting, or a loose connection.

Symptoms of a bad light socket can include:

• The refrigerator light not turning on 
• Intermittent flickering or dimming of the light
• Difficulty in installing or removing the light bulb
• Visible damage on the socket

Replace your malfunctioning light socket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Cold Control is an OEM part for Frigidaire refrigerators. It plays a key role in regulating the refrigeration cycle and maintaining optimal temperatures inside the refrigerator and freezer compartments. The cold control sensor monitors interior conditions and signals the compressor and condenser fan module to turn on or off accordingly.

Causes of bad cold control can include fatigue of internal components from repeated cycling over the refrigerator's lifespan, mineral or moisture buildup affecting sensors and circuitry, or failure due to sudden temperature fluctuations. 

Symptoms of a bad cold control include:

• Inconsistent or fluctuating temperatures within compartments
• The refrigerator or freezer running constantly 
• Food not staying freshest as long as expected
• Frost or ice buildup inside that is difficult to remove

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Defrost Timer is an OEM part for Frigidaire refrigerators. It regulates the automatic defrost cycle of the freezer, preventing the buildup of frost and ice on the evaporator coils.

A bad defrost timer can be caused by electrical issues, component failure, or malfunctioning mechanisms. When the timer becomes faulty, it can result in issues such as excessive frost buildup, poor cooling performance, or a constantly running compressor.

Symptoms of a bad defrost timer include:

• Frost or ice accumulation in the freezer
• Inadequate cooling in the refrigerator 
• Constantly running compressor 

Replace your faulty defrost timer with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This replacement screw fastens appliance components so panels, brackets, and covers stay securely in place. Replace a missing, stripped, or damaged screw to restore a tight fit and help prevent vibration or noise. What it does:

• Secures panels, brackets, trim, or covers as designed for your model
• Replaces missing, rusted, or stripped hardware
• Helps correct loose or misaligned components
• Reduces vibration and rattling from loose fasteners

• Includes: 1 screw

• Disconnect power before servicing
• Wear gloves and eye protection
• Use the correct driver to avoid stripping the screw head
• Tighten snugly without overtightening; refer to your model's parts diagram for exact location