Parts for Ge GTH18KBMBRBB: 01 - Doors Parts

Replacement door handle assembly for refrigerators. Installs on the door exterior. Needed when original handle is cracked, broken, or missing.

Replace your worn, discolored, or broken refrigerator door handle assembly. Restores a clean grip surface and secure door operation. Direct-fit hardware.

Replacement door handle assembly for refrigerators. Installs on the door exterior. Needed when original handle is cracked, broken, or missing.

This small handle assembly replaces a worn or broken appliance door handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed for fast cosmetic and functional repair. What it does:

• Replaces a damaged or cracked small handle to stop slipping and improve door access
• Restores proper leverage for opening and closing the appliance door
• Matches the original fit and mounting points for a straightforward swap
• Helps eliminate rattling or movement caused by a loose or broken handle

• Basic hand tools typically required;
• Disconnect power and empty the door/drawer before beginning work for safety and easier handling
• Keep mounting screws and trim in a safe place and compare the new part to the old one before installing

Replacement door handle assembly for refrigerators. Installs on the door exterior. Needed when original handle is cracked, broken, or missing.

This small handle assembly replaces a worn or broken appliance door handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed for fast cosmetic and functional repair. What it does:

• Replaces a damaged or cracked small handle to stop slipping and improve door access
• Restores proper leverage for opening and closing the appliance door
• Matches the original fit and mounting points for a straightforward swap
• Helps eliminate rattling or movement caused by a loose or broken handle

• Basic hand tools typically required;
• Disconnect power and empty the door/drawer before beginning work for safety and easier handling
• Keep mounting screws and trim in a safe place and compare the new part to the old one before installing

Replace your worn, discolored, or broken refrigerator door handle assembly. Restores a clean grip surface and secure door operation. Direct-fit hardware.

Assembly screw kit for refrigerators. Secures handles, shelf tracks, door hinges, and interior panels. Replace missing, stripped, or lost screws.

Seals freezer door to keep cold air in and moisture out. Replace if worn, cracked, or causing frost buildup. Confirm fit with your model number.

Creates an airtight seal on your freezer door to prevent warm air and moisture infiltration. Replace if worn, cracked, or causing frost buildup.

White freezer door stop that holds the door in place and prevents it from swinging too far. Replaces cracked, broken, or missing door stops.

Replacement door stop for your refrigerator's freezer compartment. Holds the door at the correct angle when opened. Replace if cracked, broken, or missing.

This push-button plug insulates and seals a control panel push-button, helping keep the button stable and protecting the switch from moisture and debris. Fits where a small plastic button bushing or insulator is needed on the control panel. What it does:

• Provides an insulating bushing for a control panel push-button or switch
• Helps hold the button aligned and reduces wobble or uneven operation
• Shields the switch contacts from moisture and dirt that can cause intermittent operation
• Commonly replaced when the button is loose, damaged, cracked, or missing

• Disconnect power to the appliance before removing the control panel or working near electrical components
• Remove the control panel or trim; use appropriate tools to avoid cracking surrounding plastic
• Install the plug gently; do not force or use excessive heat

This molded door corner cap replaces a cracked or missing corner trim piece to restore a clean look and help protect the door edge. It's a simple, direct replacement part for damaged or worn corner trim. What it does

• Covers and protects the refrigerator/freezer door corner from impacts and wear
• Helps maintain proper door seal alignment by preserving the door edge shape
• Prevents sharp or rough edges that can catch or chip the door liner
• Common symptom: visible crack, broken or missing corner trim exposing the door edge

• One door corner cap

• Disconnect power to the appliance before beginning any service
• Often installs with snap-fit clips or small fasteners; gentle prying may be required
• Avoid using excessive force that could damage the door liner or adjacent trim

This replacement door corner cap restores a finished edge to the refrigerator/freezer door, helping protect the door trim from chips and keeping the cabinet looking complete. Simple, low-cost fix for cosmetic and minor protective damage. What it does:

• Covers and protects a door corner where the original cap is cracked, broken, or missing
• Restores a smooth edge to prevent snags and reduce dirt buildup
• Maintains the intended appearance of the door trim
• Fits into the existing corner recess and holds in place without affecting door function

• Disconnect power to the appliance before working near doors or hinges
• Remove the damaged cap by gently prying from the corner with a non-marring tool
• Press the replacement cap into the corner recess until it snaps or seats fully
• Reuse only verified fasteners or adhesives compatible with the door material.

Replace your damaged or missing refrigerator shelf end cap button. This plastic cap covers and secures the shelf support assembly. Ideal for cracked or broken caps.

Seals the gap between your refrigerator door and cabinet to prevent cool air from escaping. Replace if cracked, rotted, or no longer sealing properly.

Seals the fresh food door to maintain temperature and prevent air leaks. Replace if you notice condensation, frost buildup, or warm air entering. Confirm fit with your model number.

Clear plastic dairy door cover for refrigerator compartments. Replaces cracked, broken, or missing covers. Keeps butter and cheese organized.

Covers unused hinge or mounting holes on refrigerator doors after reversing door swing. Replaces cracked, missing, or damaged plugs for a clean finish.

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

Reversible door plug fills unused mounting holes when switching refrigerator door swing direction. Replaces broken or missing plugs for a finished look.

Replaces a cracked, broken, or missing refrigerator plug button. This cosmetic insert installs in cabinet holes to cover openings and finish edges.

Replace a cracked, broken, or missing plug button insert for your refrigerator handle. This cosmetic part covers screw holes and completes the handle.

Replacement screw for refrigerators. Secures handles, panels, and internal components. Order if yours is missing, stripped, or lost during repairs.

White outer door panel assembly for refrigerator freezer door. Replace if your door panel is cracked, dented, discolored, or showing wear on the exterior.

White plastic plug insert that covers the door thimble opening on your refrigerator. Replaces cracked, broken, or missing plugs to restore a clean finish.